Control Unit for Wall with RGB Function Touch Radio Controller

Reference: A40WALLCT00N

QLT

Wall touch control unit, with color temperature management function from warm white to cold white. To combine with the radio remote control receiver (A40RC433CT0N) to control strips or LED modules at 12V or 24V. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.

Reference: A40WALLDIMON

QLT

Wall touch control unit, with dimmer light management function. To be combined with the receiver remote control (A40RC433DIMN) for brightness control of LED strips or 12V or 24V modules. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.

Reference: A40DALI1000B

QLT

Brightness regulator with DALI/1-10V potentiometer or button control, 12-24V VDC power supply (12A max) for LED strips and modules.

Reference: A40DALI110PB

QLT

Brightness controller with control DALI or 1..10V with low voltage push, For resistive loads up to 12A, Input 12V-24V/DC, Dimensions 138x40x28,5 mm,

Reference: A40PDCV1000B

QLT

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.

Reference: A40PDCVD000B

QLT

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open) button.