Reference: 162089
Brand: TCI
Dimmer for LED modules with reduced dimensions, equal to those of a common pass-through switch on wire. Suitable for use with 350 - 500 - 700mA LEDs with power from 2W to 18W.
Mounting accessories for textile cables, ceramic insulators for the 'installation of electrical cable in areas where no cable routing ducts have been prepared, or in the old brick houses where you want to maintain a rustic effect.
There are 35 products.
Reference: 162089
Brand: TCI
Dimmer for LED modules with reduced dimensions, equal to those of a common pass-through switch on wire. Suitable for use with 350 - 500 - 700mA LEDs with power from 2W to 18W.
Reference: 0211/GR/50
Brand: FAI
Metal rod with a length of 50 cm
Reference: 3.X189.00
Brand: IGuzzini
Joint connector in FOUR-POLE and 4 cables inputs, thermoplastic material, H-shaped for outdoor use IP68.
Reference: 3.BZN7.00
Brand: IGuzzini
Joint connector in FIVE-POLE and 5 cables inputs, thermoplastic material, Y-shaped for outdoor use IP68. For the connection of the DMX or DALI signal cable and power supply cable
Reference: BOX2/IP68
Brand: Lampo Lighting
Junction device in thermoplastic material with 2 Outputs Connection 3x1.5. For neoprene cables. External cable diameter (min. - max.) 8 - 10mm. With cord anchor for outdoor use.
Reference: BOX4/IP68
Brand: Lampo Lighting
Junction device in thermoplastic material with 4 Outputs Connection 3x2.5. For PVC or neoprene cables. External cable diameter (min. - max.) 6.5 - 12mm. With cord anchor for outdoor use.
Reference: CONNIP68D
Brand: Lampo Lighting
Junction connector in THREE-POLE thermoplastic material and two inputs, linear "I" shape for outdoor use IP68.
Reference: CONNIP68T
Brand: Lampo Lighting
Joint connector in THREE-POLE and 3 cables inputs, thermoplastic material, T-shaped for outdoor use IP68.
Reference: 0156
Brand: FAI
Niples with hexagonal head in black plastic with thread M10X1, accessory for lamp holders and DIY.
Reference: 0226
Brand: FAI
Galvanized iron threaded niples for nut M10X1, accessory for lampholder rosettes available in three different lengths 15, 20 and 25 mm.
Reference: 0211/OT/30
Brand: FAI
Metal tige with M10X1 screw in both ends and a total length of 30 centimeters, with the possibility of passing the electric cable inside the tube. Accessory for multiple locations. Ideal for DIY applications and wall or ceiling lamps. Material: Metal, Size: 30cm * 10mm (thread diameter), for: lampholder / rosettes / cables,
Reference: 0211/OT/10
Brand: FAI
Metal tige with M10X1 screw in both ends and a total length of 10 centimeters, with the possibility of passing the electric cable inside the tube.
Reference: 162093
Brand: TCI
Dimmer and switch on/off for LED through-wire, for dimmable Push LED and halogen bulbs. Ideal for adjusting the light intensity.
Reference: PRESS-C-RED
Cable clamp for ceiling or wall mounting made in aluminium, with screw and dowel
Reference: SNOFIL-RA
Material : Copper, Size : 40mm x 40mm * 15 mm (diameter), For: Lamp holder/ ceiling rose/ cables , Thread: M10X1, Weight : 17g,
Reference: SNOFIL-BR
Material : Brass, Size : 40mm x 40mm * 15 mm (diameter), For: Lamp holder/ ceiling rose/ cables , Thread: M10X1, Weight : 17g,
Reference: 0212
Brand: FAI
Material : Brass, Size : 30mm * 10 mm (diameter), For: Lamp holder/ ceiling rose/ cables , Weight : 17g,
Reference: 0250/RS
Brand: FAI
Cable clamp (cord grip) for ceiling or wall mounting, ideal for round cable
Reference: 0250/NE
Brand: FAI
Cable clamp (cord grip) for ceiling or wall mounting, ideal for round cable
Reference: 0250/MA
Brand: FAI
Cable clamp (cord grip) for ceiling or wall mounting, ideal for round cable
Reference: 0250/BI
Brand: FAI
Cable clamp (cord grip) for ceiling or wall mounting, ideal for round cable