Remote control systems for very low voltage 12/24 / 48V LED applications.These systems and control units allow the regulation of LED lighting systems thanks to remote controls .Dmx, dali, button or remote control units, PWM or rgb signal amplifiers are available.They can be used in systems with installed led strips, in mono color or in red / green / blue and rgbw.These led remote control products allow the regulation of light intensity, rotary color change or more complex random games.
Mono channel dimmer 100-240V with push control and WiFi function, with TuyaSmart or SmartLife APP control and Alexa/Google assitant voice control. For dimmable LED bulbs, Triac dimmable led drivers, incandescent lighting and HV halogen bulbs. Max 1,5A.
The TCI CBU-ASD is a wireless control unit for LED and halogen drivers with 0-10V, 1-10V or DALI dimming interface. The control output can be configured as an analogue control interface with 0-10V (and 1-10V) or digital driver with DALI Standalone. It can control up to 3 DALI drivers. Ideal for many Flos branded items.
CBU-PWM4 is a Bluetooth 4.0 controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.
The CASAMBI Professional TCI is a direct current multipower power supply with DIP-SWITCH to select the required DC, complete with antenna with a wireless control unit with 0/1 - 100% brightness adjustment via PUSH SWITCH function and APP or compatible devices for CASAMBI WIRELESS module integrated.
Interface dimmer for DALI BUS (9-26V) for home automation Domotic, allows to create a DALI line to control compatible devices and accepts dimming via the 0-10V or 1-10V button. TIMER function 3 minutes. Use cable suitable for the DALI signal up to 300 meters.
Lampo Wifi controller kit for LEDs or RGB strips of 12V (144W Max) or 24V (288W Max). The kit includes power cable and RGB LED strip connection cable. No need remote control, possibility to manage via smartphone APP or with the sound of your voice via Amazon Alexa and Google Home. Input 5-24Volt. Up to 16 million colors.
RGB controller with touch system, ideal for adjusting light intensity and managing colors in different scenes of 12 / 24V RGB systems. Recessed or surface mounted with special kit to be purchased separately. Dimensions: 86x86x35 mm. Supported power: 12V Max 144W, 24V Max 288W
Motion detector with microwave sensor (5.8 Ghz), able to overcome obstacles such as glass, doors or thin walls, equipped with adjustment of the distance from 3 to 10 meters, the time from 10 seconds to 15 minutes and the sensitivity of the light from 10 to 2000 lux. With a 360 ° range of action. IP20.
ON / OFF sensor with 2 operating modes, working 12-24V for a maximum of 15W at 12V and 30W at 24V. Ideal for LEDs, use in furniture doors to turn the light on and off automatically. Cable length 250 cm. IP20 protection degree for indoor use. Fixing with screws or recessed, complete with adhesive.
Recessed touch dimmer sensor operating at 12-24V for a maximum of 60W. Blue circular LED light on / off on the top. Ideal for strips and LED modules. Including AMP / JST adapter. Cable length 2 x 150cm + AMP (plug). Degree of protection IP44 for outdoor. Built-in hole 17.3 mm.
The CBU-ASD is a wireless control unit for LED and halogen drivers with 0-10V, 1-10V or DALI dimming interface. The control output can be configured as an analogue control interface with 0-10V (and 1-10V) or digital driver with DALI Standalone. It can control up to 3 DALI drivers. Ideal for many Flos branded items.
Wall touch control unit, with dimmer light management function. To be combined with the receiver remote control (A40RC433DIMN) for brightness control of LED strips or 12V or 24V modules. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.