Complete with antenna with a wireless control unit with 0/1 - 100% brightness adjustment via PUSH SWITCH function and APP or compatible devicesfor CASAMBI WIRELESS module integrated.
. Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless CASAMBI receiver. . IP20 independent driver, for indoor use (PROFESSIONALE CASAMBI). . Class II protection against electric shock for direct or indirect contact (PROFESSIONALE CASAMBI). . Driver for built-in use (PROFESSIONALE CASAMBI BI). . It can be used for lighting equipment in protection class I and II (PROFESSIONALE CASAMBI BI). . Active Power Factor Corrector. . Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15). . Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 9 mm (PROFESSIONALE CASAMBI). . Driver can be secured with slot for screws. Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. . Thermal protection = C.5.a. . Do not apply within 0,2 m from human body.
. Light regulation 0/1 - 100 % by means of PUSH SWITCH function and APP or compatible devices for CASAMBI integrated WIRELESS module. . Full AM DIMMING: 1-100% (minimum current: 7 mA). . Light regulation 0/1 - 100 % by means of PUSH SWITCH function (mains voltage): - a short push to turn on and off; - a longer push to increase or decrease light intensity; - regulation automatically stops at minimum and maximum values; - for another on, regulation or off command, release the push button and give the desired command again; - dimming level memory at mains restore. . Maximum length of the cable, from push button to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 240 V mains cable. . ATTENTION: only use normally open push buttons with no incorporated warning light.
Selection of constant output current by dip-switch