Reference: RF19850

Flos spare parts

Dimmer kit for Toio halogen lamp complete with power cable and dimmer

Reference: DLX1224-4CV-DMX

Dalcnet

BUS + SEQUENCER + FADER + DIMMER + DRIVER ,DMX control interface operated 12-24V with 4 channels of 5A (max 10A total). dimensions: 88 x 54 x 26 mm

Reference: ZKCDA

Duralamp

Dali Controller for White Light Strip 12-24 VDC 

Reference: RF31753

Flos spare parts

Table or floor dimmer for LED or halogen lamps, in class II. code: RF31753 replaces the RF28229

Reference: LSDIMMTDF

Lampo Lighting

Mono channel dimmer with phase cut output. It can be controlled with Bluetooth both via an application for Android and iOS devices and from an isolated push button

Reference: LSDIMMTDFWIFI

Lampo Lighting

Mono channel dimmer 100-240V with push control and WiFi function, with TuyaSmart or SmartLife APP control and Alexa/Google assitant voice control. For dimmable LED bulbs, Triac dimmable led drivers, incandescent lighting and HV halogen bulbs. Max 1,5A.

Reference: WLTOUCHSQ

Lampo Lighting

Wall controller ultrapiatto quadrato senza fili a batteria per sistemi 12 o 24 V .

Reference: T250/NE

Lampo Lighting

Mini dimmer with push button for LED, incandescent and halogen lamps with LED light for signaling mains presence. In thermoplastic material. For a minimum power of 10W and a maximum of 150W. Halogen and incandescent 150W Max. Available in black or white. Dimensions: 30x70x18 mm

Reference: 123999L

TCI

The rotating electronic potentiometer CP is used for regulation of electronic drivers with interface 1...10 V. 140mm long cable.

Reference: RF28045

Flos spare parts

Spare round rondò dimmer and ignition, for Flos lamp, in the version with LED bulb of maximum 100W.

Reference: RF28230

Flos spare parts

The flos uses this dimmer kit with cable to power the model in the led version of the Toio lamp by Achille and Pier Giacomo Castiglioni designed in 1962. Possibility to adjust the light intensity.

Reference: DLM1224-1CV-DALI

Dalcnet

Dalcnet dimmer for low voltage led modules from 12 to 48 volts dc. Adjustable with dali, dmx, 1-10 V, push button signal .

Reference: 551010.0DA

Daylight Italia

The AC Dimmer is a single channel dimmer output phase-cut and it adjusts the brightness of dimmable LED lamp, dimmable halogen lamp and AC phase-cut power supply. Adjustment by Push Button.

Reference: RF6608100

Flos spare parts

Flos Button and plug dimmer with black cable for Flos Taccia in the LED version.

Reference: 180427

TCI

Universal TRIAC pushbutton dimmer for LED lamps 230 V for standard 35 mm rail.

Reference: 124385RH

TCI

Electronic dimmer with 230V input and 230V phase cut output. Power from 20W to 100W.

Reference: RF26254

Flos spare parts

Flos printed circuit touch dimmer kit for Snoopy table lamp. Spare part to be replaced inside the lamp.  WARNING!!! The touch dimmer is not compatible with the old resistive version of the Snoopy lamp. Input voltage 100-240V.

Reference: 162113

TCI

Universal flush-mounted regulator with separate push button. It can control: halogen and incandescent lamps, electronic transformers, LED Driver DIM, dimmable LED lamps (with Trailing edge technology - IGBT)

Reference: 905

Helvar

The 905 Router uses an Ethernet connection (10/100 Mb/s) to control a local DALI network. Basic functionality is available out of the box without any programming. 

Reference: RSSTD

Helvar

Intelligent DALI lighting controls for single rooms. RoomSet is Helvar s state-of-the-art lighting for rooms. It s designed for repeatable spaces, including classrooms, meeting rooms and hospital wards. The RoomSet lighting solution works out-of-the-box and is commissioned using the intuitive RoomSet App. Now you can create personalised lighting scenes...

Reference: 162102

TCI

TCI Rondò electronic dimmer, dimmer with linear slider to adjust the intensity of LED or halogen lamps. It supports LED lamps from 4 to 100W and halogen lamps from 10 to 150W.

Reference: A40PDCV1000B

QLT QUALITRON

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.

Reference: A40PDCVD000B

QLT QUALITRON

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open) button.

Reference: A40PDMC1000B

QLT QUALITRON

Dimmable multipower power supply PDMC1 Driver for LEDs in constant current from 100mA to 700mA for a maximum of 13W (230V) and 9W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button.