Dimmer, voltage and brightness regulators ready for delivery.With the use of these accessories it is possible to create environments, scenarios, increase and lower the ambient light.Models with manual push-button control or with remote control wifi and remote control are available .
Electronic round dimmer R302057 provided by Artemide, switch to adjust the light intensity via slide and the on/off switching of the dimmable or halogen LED bulbs for Artemide Mega and Maxi Tolomeo floor lamps. Size 100x29mm.
Mono channel dimmer 100-240V with push control and WiFi function, with TuyaSmart or SmartLife APP control and Alexa/Google assitant voice control. For dimmable LED bulbs, Triac dimmable led drivers, incandescent lighting and HV halogen bulbs. Max 1,5A.
Flos printed circuit touch dimmer kit for Snoopy table lamp. Spare part to be replaced inside the lamp.
WARNING!!! The touch dimmer is not compatible with the old resistive version of the Snoopy lamp. Input voltage 100-240V.
Universal flush-mounted regulator with separate push button. It can control: halogen and incandescent lamps, electronic transformers, LED Driver DIM, dimmable LED lamps (with Trailing edge technology - IGBT)
Intelligent DALI lighting controls for single rooms. RoomSet is Helvar s state-of-the-art lighting for rooms. It s designed for repeatable spaces, including classrooms, meeting rooms and hospital wards. The RoomSet lighting solution works out-of-the-box and is commissioned using the intuitive RoomSet App. Now you can create personalised lighting scenes...
TCI electronic dimmer Rondò to regulate the luminous intensity and the on / off switching of dimmable or halogen LED bulbs. Interrupted load with four wires from 0 to 440W in 220-240V and from 0 to 200W in 100-127V. For dimmer functionality, light adjustment from 4 to 100W for LEDs and from 4 to 200W for halogen bulbs (220-240V) and from 4 to 100W for...
Dimmable multipower power supply PDMC1 Driver for LEDs in constant current from 100mA to 700mA for a maximum of 13W (230V) and 9W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button.
Dimmable multipower power supply PDMCD Driver for LEDs in constant current from 100mA to 700mA for a maximum of 13W (230V) and 9W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open) button.