- Reduced price

Flos Camouflage LED wall lamp 8W with a diameter of 140 mm, for outdoor and indoor use available in ten colors and three different shades of light color.
Read more ...Dissipating body in aluminum with transparent polycarbonate diffuser. The Crema D'Orcia Stone and Basaltina finishes are made by fixing a stone plate, created through a mechanical processing process from a solid block, using a very high-strength glue.
The Concrete finish is made by fixing a plate made of cast concrete reinforced with glass fiber using one-component high-strength adhesive.
The Primer version can be painted after installation with normal water-based colors (tempera, stucco, water-based paints) to ensure maximum homogeneity with the architecture.
The aluminum versions are finished with a high-strength coating: after a sandblasting treatment of all components, to make the surface porous and ensure greater adhesion of the paint, an external coating with double layer of powders is applied according to the QUALICOAT standard. The first layer of epoxy powder gives chemical and mechanical resistance, the second finishing layer of polyester powder ensures resistance to UV rays and atmospheric agents. The painted surfaces are treated with alkaline and acid washes, rinsed with demineralized water, and subjected to a chemical conversion treatment to protect against oxidation. Subject to commercial and technical evaluation, it is possible to create customized versions with other materials on request.
24V remote power supply to be ordered separately. Includes power cable of 100mm. The power supply can be installed remotely (installation box not required) or housed at the back of the luminaire in the optional installation box (See Accessories).
Available finishes: White, Gray, Anthracite, Black, Dark Brown, Cement, Crema d'Orcia, Basaltina and Primer. New Forest Green finish available.
Available light temperatures: 2700K, 3000K, 4000K
Source: Power LED 8W - 2700K - CRI> 80 - Beam 157°
Reference: LPV-20-24
Power Supply LPV-20-24 20.2W 24V 0.84A IP67 Constant Voltage Driver
Reference: A40NICE2060B
miniaturized constant current power supply unit, 500mA 10,5W Max.
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: F1318000
Flos formwork F1318000 for Camouflage 140 model