

Operation Mode
• Light regulation 0/0,5 - 100 % by means of PUSH LV function, 0/1...10 V interface (I=0,4 mA) or 10 Kohm potentiometer.
• Output dimmed by PWM 250 Hz.
• Dimming mode selection (1...10 V or Push) by dip-switch below the cover.
• Light regulation 0/0,5 - 100 % by means of PUSH function (secondary, push button 24 V):
- a short push to turn on and off;
- a longer push to increase or decrease light intensity;
- regulation automatically stops at minimum and maximum values;
- for another on, regulation or off command, release the push button and give the desired command again;
- dimming level memory at supply restore.
• Maximum length of the cable, from push buttom to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 100 - 240 V mains cable.
• ATTENTION: only use normally open push buttons with no incorporated warning light.
• Provided with dimming terminal connection with a 0/1...10 Vdc electronic potentiometer (0/1...10 V local dimming, with insulation according to standards of final application).
Reference: 127032
MINI MD electronic dimmable power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 21W. Rated input voltage 240V. Power supply with ten-year warranty.
Reference: 127042
Dimmable electronic MICRO MD power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 10W. Rated input voltage 240V. Power supply with ten-year warranty.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Be the first to ask a question about this product!
Reference: 162102
TCI Rondò electronic dimmer, dimmer with linear slider to adjust the intensity of LED or halogen lamps. It supports LED lamps from 4 to 100W and halogen lamps from 10 to 150W.
Reference: 124385RH
Electronic dimmer with 230V input and 230V phase cut output. Power from 20W to 100W.
Reference: 162110
Recessed rotary dimmer available for different recessed series suitable for regulating dimmable LED bulbs of the best brands on the market.
Reference: 162113
Universal flush-mounted regulator with separate push button. It can control: halogen and incandescent lamps, electronic transformers, LED Driver DIM, dimmable LED lamps (with Trailing edge technology - IGBT)
Reference: 180429
PUSH / DALI dimmer converter, with push button control for LED lamps with DALI and DALI2 regulation.
Reference: S306BI
Adjustable spotlight with metal clamp with E27 fitting complete with switch, cable guide, cable and plug, overall length 150 cm. For installation on any surface. Available in white and black.
Reference: 1907-10-1111-DXWE
Altura, linear floor lamp with two rods, for indoor use. Steel structure and conical painted aluminum lampshade. Height adjustable through horizontal rod sliding on central joint. Available in versions with 2700K or 3000K color temperature. Dimmer on cable.
Reference: S311NE
Adjustable metal spotlight with GU10 lamp holder, complete with base for wall or ceiling installation. Available in two different colors black and white.
Reference: SPLED506FLAN
Anthracite flange accessory for recessed mounting for 503
Reference: FN286001_40
Foscarini Cricri, led table lamp, made of silicone, ABS and PMMA. Suitable for any indoor and outdoor environment.
Reference: LA CUX030A
MERRY CUBO RGB - Battery-powered Christmas decoration with RGB LED source, made of Polyethylene, suitable for indoor and outdoor use. Available in two different sizes. RGB kit included.