

Features: Class II driver - case IP68, suitable for submersion and installation in humid environments or in contact with water. Class II protection against electric shock for direct or indirect contact. Supplied with cables on primary and secondary circuit for connection. For the version with supplied cables: if the input cable is damaged it can only be replaced by authorized personnel. Input and output terminal blocks on opposite sides. Easy to assemble and install. Protections:against overheating and short circuits, against mains voltage spikes, against overloads. Conformal Coating available upon request
Be the first to ask a question about this product!
Reference: 127016
Multipower electronic LED driver PUSH dimmable DC
Reference: 141092
Electronic power supply 12W in direct current 250mA (10W) or 350mA. IP20 independent power supply, for indoor use. Nominal voltage 220-240V. Dimensions: 70x41x19 mm.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: 122262
TCI DC JOLLY MD LC multipower driver 7,2-24W 150-500 mA dimmable with igbt/triac system, mains dimming trailing edge/leading edge. Dimensions: 166X46X34mm
Reference: 99157/27
Wall-mounted round steplight application in die-cast aluminum, created to illuminate gardens and paths with discretion. Embossed white, embossed mud brown coffee or graphite dark gray color finishes. Designed for outdoor lighting.
Reference: 620/MED/DIM/OP/BI
Martinelli Luce Pipistrello medium, made of steel and methacrylate lampshade. Available in matt white finish.
Reference: 141110IP
Electronic driver in SLIM format in direct current 350mA maximum 15W. Rated input voltage 100-240V. Dimensions: 161x22x22mm