Choose a searcher
Constant current power supplies
  Filter
Brands
Voltaggio in ingresso
Corrente costante in uscita

Reference: 127572

TCI

Electronic driver adjustable in direct current with DIP-SWITCH. Multipower supply equipped with dip-switch for the selection of output current. IP20 driver, for indoor use. Voltage 220-240V. Dimensions: 146.5x43x22 mm. Constant current output from 125mA to 500mA. Dimensions: 146,5x43,5x22 mm.

Price $42.50 Regular price $53.13
Shipped in 1-2 days

Reference: KIG-060-DH

Generico

Available in different variants

Constant current LED driver, 60W multi-current at 2100mA max, dimmable Triac ELV, 0-10V, 1-10V, potentiometer, 10V PWM. Available at 200-240V and 100-277V. Dimensions: 171.5x54x20mm.

Price $44.28
Shipping in 1-2 days

Reference: KIG-040-DH

Generico

Available in different variants

Constant current LED driver, 40W multi-current at 1400mA max, dimmable Triac ELV, 0-10V, 1-10V, potentiometer, 10V PWM. Available at 200-240V and 100-277V. Dimensions: 171.5x54x20mm.

Price $36.69
Shipping in 1-2 days

Reference: KIG-020-DH

Generico

Available in different variants

Constant current LED driver, 20w multi-current at 700mA max, dimmable Triac ELV, 0-10V, 1-10V, potentiometer, 10V PWM. Available at 200-240V and 100-277V. Dimensions: 159.5x43x20mm.

Price $30.36
Shipping in 1-2 days

Reference: KIG-010-DH

Generico

Available in different variants

Constant current LED driver, 10W multi-current at 450mA max, dimmable Triac ELV, 0-10V, 1-10V, potentiometer, 10V PWM. Available at 200-240V and 100-277V. Dimensions: 135x30x20mm.

Price $27.83
Shipping in 1-2 days

Reference: A40PLP30300N

QLT QUALITRON

Available in different variants

Qlt PLP driver power supply for LEDs with plug and switch on cable in constant current at 700mA, up to 8.4W in 230V and 8.4W in 110V (12V max) available in two different colours, black and transparent. Dimensions: 68x54x20mm.

Price $18.65
Shipped in 7-21 days

Reference: A40PLP30600N

QLT QUALITRON

Available in different variants

Qlt PLP driver power supply for LEDs with plug and switch on cable in constant current at 700mA, up to 14W in 230V and 9W in 110V (24V max) available in two different colours, black and transparent. Dimensions: 68x54x20mm.

Price $23.84
Shipped in 7-21 days
Sale Constant current power supplies

Constant current power supplies

Diffusione luce offers for sale a complete range of constant current electronic power supplies for LED applications. To choose the right constant current power supply it is necessary to carry out this calculation: current absorbed by the LED spotlight x working voltage of the spotlight. Example: 0.350 A x 3.4 volts = 1.2 W (power absorbed by the spotlight). In this case, you must choose a power supply with an output power starting from 1.2W and a current of 0.350 A. Do not install power supplies with a minimum output power higher than the nominal power absorbed by the installed spotlight, for example: 1.2W and 350mA spotlight with power supply starting from 4w and 350mA -> wrong and broken LED diode. Different matter when LED spotlights are installed in series, in this case to calculate the power of the power supply it is necessary to add the power of the spotlights, example: 10 products of 1.2w and 350 mA = 12w 350mA -> necessary power supply with nominal power minimum 12w 350mA. Meanwell electronic ballasts with IP65/IP67 protection ratings are also available for outdoor applications.

group_work Cookie consent