- On sale!
- Discount from
-30%

Nominal voltage 110-127V and 220-240V
Dimensions 110x52x23 mm
Features
. Multipower driver supplied with dip-switch for the selection of the output current.
. IP20 independent driver, for indoor use
. Class II protection against electric shock for direct or indirect contact.
. It can be used for lighting equipment in protection class I and II.
. Active Power Factor Corrector.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.
. Double output impedance for use in household electrical appliances.
New version of the old model: 123400
Selection of constant output current via dip-switch, Variants:
13W (13) 20~53V max. 350 mA cost.
15W (15) 20~52V max. 250 mA cost.
18W (15) 15~50V max. 300 mA cost.
20W (15) 15~45V max. 350 mA cost.
20W (15) 5~40V max. 500 mA cost.
20W (15) 5~37V max. 550 mA cost.
20W (15) 3~34V max. 600 mA cost.
20W (15) 3~31V max. 650 mA cost.
20W (15) 3~29V max. 700 mA cost.
20W (15) 3~27V max. 750 mA cost.
20W (15) 3~25V max. 800 mA cost.
20W (15) 3~24V max. 850 mA cost.
20W (15) 3~23V max. 900 mA cost.
Selection of constant output voltage via dip-switch, Variants:
20W (10) 12 cost. 850 mA max
20W (15) 24 cost 900 mA max