Reference: 181220

TCI

The TCI CBU-ASD is a wireless control unit for LED and halogen drivers with 0-10V, 1-10V or DALI dimming interface. The control output can be configured as an analogue control interface with 0-10V (and 1-10V) or digital driver with DALI Standalone. It can control up to 3 DALI drivers.

Reference: 181221

TCI

CBU-PWM4 is a Bluetooth 4.0 controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.

Reference: 181225

TCI

CBU-DCS is a dimmer powered by DALI bus for Casambi controllable via Bluetooth 4.0 for the operation of incandescent lamps, dimmable LEDs and dimmable LED power supplies. Compatible with DALI presence and light detectors.

Reference: 181224

TCI

CBU-TED is a Bluetooth controllable, Casambi enabled trailing-edge dimmer for operation of incandescent lamps, dimmable LED lamps and dimmable LED control gear.

Reference: LCM-40BLE

Mean Well

Mean Well LCM-40BLE 40W constant current LED driver, 350-1050mA, with integrated Casambi Bluetooth control and DALI compatibility.

Reference: SENSPIRSUP

Lampo Lighting

Round infrared twilight PIR sensor with surface mounting IP20 for indoor use, 360 ° detection maximum 6 meters. Adjustable by time and sensitivity to light.

Reference: SENSPIRBI

Lampo Lighting

IP54 wall-mounted infrared twilight PIR sensor for outdoor use, detection at 180 ° maximum 12 meters. Adjustable in time and in light sensitivity.

Reference: SENSPIRINC

Lampo Lighting

Recessed infrared twilight PIR sensor IP65 for outdoor use with time and twilight adjustments.

Reference: SENSCRP15A

Lampo Lighting

IP65 twilight switch for outdoor use with brightness intensity adjustment with adjustable sensitivity from 10 to 50 lux.

Reference: DLM1224-1CV-DALI

Dalcnet

Dalcnet dimmer for low voltage LED modules from 12 to 48 volts DC. Adjustable with Dali signal, DMX, 1-10 V, push button

Reference: 127630

TCI

The CASAMBI Professional TCI is a direct current multipower power supply with DIP-SWITCH to select the required DC, complete with antenna.

Reference: KTRCTV01

Duralamp

Duralamp wireless set consisting of a receiver unit with antenna and two radio controls. The receiver is a 2-channel watertight control unit operating on the 433 MHz band suitable for use both indoors and outdoors.

Reference: 905

Helvar

The 905 Router uses an Ethernet connection (10/100 Mb/s) to control a local DALI network. Basic functionality is available out of the box without any programming. 

Reference: A40PDCV1000B

QLT

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.

Reference: A40PDCVD000B

QLT

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open) button.

Reference: A40DDMASTERN

QLT

Interface dimmer for DALI BUS (9-26V) for home automation Domotic, allows to create a DALI line to control compatible devices and accepts dimming via the 0-10V or 1-10V button. TIMER function 3 minutes. Use cable suitable for the DALI signal up to 300 meters.

Reference: KITRGBWIFI

Lampo Lighting

Lampo Wifi controller kit for LEDs or RGB strips of 12V (144W Max) or 24V (288W Max). The kit includes power cable and RGB LED strip connection cable. No need remote control, possibility to manage via smartphone APP or with the sound of your voice via Amazon Alexa and Google Home. Input 5-24Volt. Up to 16 million colors.

Reference: WALLDIMTOUCH

Lampo Lighting

Dimmer controller with touch system, ideal for adjusting light intensity and managing 12 / 24V systems. Brightness adjustment via TOUCH ring, ON-OFF button included. Recessed or surface mounted with special kit to be purchased separately. Dimensions: 86x86x35 mm. Supported power: 12V Max 144W, 24V Max 288W. DC 5-24V input

Reference: SENSMICRO

Lampo Lighting

Motion detector with microwave sensor (5.8 Ghz), able to overcome obstacles such as glass, doors or thin walls, equipped with adjustment of the distance from 3 to 10 meters, the time from 10 seconds to 15 minutes and the sensitivity of the light from 10 to 2000 lux. With a 360 ° range of action. IP20.

Reference: INLINE/TOUCH

Lampo Lighting

Semi-transparent 12-24V on-off touch sensor of small dimensions, particularly suitable for applications with LED strips. Fixing with double-sided adhesive. Internal cable length 10 cm and external 150 cm. Dimensions: 7 x 25 x 10.5 mm

Reference: DIMMLED96

Lampo Lighting

Electronic dimmer with radio-frequency 12-24V coded remote control for a maximum of 96W at 12V and 192W at 24V. Ideal for LEDs. Maximum Reception Distance of 10 meters. IP20 protection degree for indoor use. Dimensions: 35 x 116 X 57 mm

Reference: HAND/TOUCH

Lampo Lighting

On-off proximity touch sensor + Switch in 230V for a maximum of 250W. Black color. Ideal for strips and LED modules. Cable length 2 meters + connection to the switch. Degree of protection IP20. Built-in hole 13 mm.

Reference: DIMMT60WCR

Lampo Lighting

Built-in touch sensor working at 12-24V for LEDs

Reference: A40WALLCT00N

QLT

Wall touch control unit, with color temperature management function from warm white to cold white. To combine with the radio remote control receiver (A40RC433CT0N) to control strips or LED modules at 12V or 24V. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.