

Recessed luminaire that can be installed in walls, ceilings and floors (only with a spring). It is designed to use white monochrome LED lamps, powered with a continuous current of 350/500/700mA per luminaire. The D = 50 mm round frame has hidden screws, an AISI 304 stainless steel body and frame and an extra-clear, sodium - calcium tempered glass cover. The luminaire is fixed to the outer casing using special locking seals that hold it in place. The unit comes complete with LED circuit. The product's wiring system features an A2 stainless steel cable gland with a 1800 mm long H05RNF type 2x1 mm² output power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated joint located on the power cable. Two types of outer casing are available for installation and both can be ordered separately from the plastic optic assembly. The glass unit, optical assembly and outer casing together guarantee a maximum static load resistance of 2000 kg. The maximum surface temperature of the glass is less than 40°. Luminaire protected against polarity inversion. Powered in direct current at 350/500/700mA depending on the desired intensity, to be ordered separately.
Installation
The product is fixed to the outer casing using special locking seals with toolfree installation. The unit can be recessed in floors, ceilings or walls using the outer casing for installation. It can also be installed in counter walls and false ceilings using special spring accessories to be ordered separately.
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Reference: 3.X193.004
Casing made of plastic material for ground, floor, wall and ceiling with closing cap Material: thermoplastic Size (mm): 44x101, Weight (kg): 0.10
Be the first to ask a question about this product!
Reference: 3.B022.013.0
Luminaire recessed into the ground with die-cast aluminium body and outer casing; stainless-steel frame and screws; anodised polished superpure aluminium reflector. It is designed to use metal-halide lamps with adjustable spot optic. Recessed into the ground by means of an outer casing.
Reference: FC3W12VBC
IP65 recessed LED spotlight walkable for outdoor use. 3W led powered at constant voltage of 12V through converter not included. Made of aluminum. 60 ° light beam opening.
Reference: 18224
Seletti Burnt Carpet polyester carpet. Suitable for all indoor environments.
Reference: MIP60
Voltage constant DC power supply with degree of protection IP66 ( encapsulated in resin) , 24 V DC , stabilized output current of 2,5 A and max 60W power
Reference: A13601.033.0501
Jay, wall lamp, ideal for indoor installation. Available in different variants.
Reference: C06801.000.9121
Opuntia, table lamp, ideal for indoor installation. Available in different variants.
Reference: PT5LED4WMC
Slim linear LED light strip available in different lengths, high brightness for indoor use. In white thermoplastic material and white opal reflector with a wide 120° degree light beam.