

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor


Suitable for the regulation of dimmable LED bulbs of the best brands on the market (the applicable power is equal to a minimum of 4W to a maximum of 100W up to 10 bulbs) and classic halogen lamps (power from 4W to 250W). 10 bulbs max is the number guaranteed and verified by TCI, there is no construction standard for LED lamps therefore the device could work correctly even with a higher number, 15 - 20, after checking the TCI technical office. Download the pdf for more information.
General characteristics
- Installation in junction boxes.
- Multi-point adjustment by means of normally open buttons without built-in indicator light, of any series.
- Absence of acoustic hum.
- Electronic protection against overload and / or short circuit, self-resetting.
- Soft Start - Soft Stop.
- Light intensity memory (except for mains interruptions of more than 0.2 sec.).
- Dissipated power 2W / A.
- Connection with terminal block.
Synchronized control: where it is necessary to manage a higher power, it will be possible to make a connection up to a maximum of 5 devices with synchronized control; this type of connection is possible only if all the synchronized LT 2 UN are powered on the same phase. The selection of the type of operation (Master / Slave) can be made via DIP 1. The selection must be made in the absence of mains voltage. Setting the minimum: Via DIP 2 it is possible to set the minimum operating level at a level of 10% or 20%. The selection must be made in the absence of mains voltage.
Reference: 119320
Three-phase rail adapter with 3-circuit. Compatible with all phase track. Allows the ' installation of dimmable floodlight.
Reference: 119772
Dimmable electronic transformer with 12 V with possibility of being regulated with IGBT for LED or halogen lamps.
Reference: 127032
MINI MD electronic dimmable power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 21W. Rated input voltage 240V. Power supply with ten-year warranty.
Reference: 127042
Dimmable electronic MICRO MD power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 10W. Rated input voltage 240V. Power supply with ten-year warranty.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: LD0275G3
Sottosopra LED double emission rectangular wall lamp for outdoor or indoor IP65
Reference: 1D6612P00000
Hope D66/12p, dismountable ceiling lamp, for indoors. Steel and polycarbonate structure and fresnel prismatic lenses. Transparent color. Installation accessories included
Reference: 04423BI
Kartell Trays New Colors, coffee table model 80x80 cm, suitable for indoor use. Available in different finishes.
Reference: 09.8400.DY
Gustave Hospitality - Portable lamp with extractable batteries rechargeable via external battery charger, with dimmable LED source and aluminum body. For indoor and outdoor use. Available in seven finishes and two different versions.
Reference: 97501STK27
FLO Wall, wall lamp with integrated plug, LED dimmable for indoor use, with adjustable head. Cold extruded head, body and base in aluminum. Available in 7 different finishes and two versions of light temperature.
Reference: 1366W10A
Ceiling lamp with integrated LED, consisting of a series of large floating pebbles under a simple and modern aluminum disc. In turn, the pebbles reflect each other, bouncing the light between their smooth biomorphic surfaces.