

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor



Operating mode
Brightness adjustment 0/1 - 100% via PUSH function, local interface 0/1...10 V (I=0.35 mA) or 100 Kohm potentiometer. Default AM+PWM adjustment: 1-25% PWM 2 kHz+25-100% AM. PWM regulation only (240 Hz - 1-100%) and Constant Voltage 12/24V can be achieved by removing JP3. Enter JP3 to enable AM+PWM. Brightness adjustment 0/1 - 100% via the PUSH function (mains voltage L; 170 Kohm): a short press to turn on and off; a long press to increase or decrease the light intensity; the regulation stops automatically at the minimum and maximum values; for a new on, adjustment or off command, release the button and give the desired command again; restore the dimming level when the power supply returns. The maximum length of the cable, from the button to the last transformer, must be max. 15m / 49ft. In case of applications where the cable exceeds 15 m / 49 ft, keep it separate from the 110 - 240 Volt mains cable. ATTENTION: use only normally open type buttons without a built-in indicator light. Equipped with a specific terminal for regulation by connecting an electronic potentiometer 0/1...10 Vdc (local dimming 0/1...10 V, for connections external to the device ensure double insulation). Max. 10 synchronized drivers, of which only one controlled by one or more points (1 Master+9 Slaves any driver from the JOLLY Series). For PWM regulation only. Sync cable supplied separately. DALI and DMX control is possible via DALI/DMX IN
Selection via dip-switch of the constant output current Variants:
Constant voltage output - Constant voltage output
11 (11)W 12 const. 900 mA max.
20 (15)W 24 const. 830 mA max.
* The power in W between walls refers to the 110-120V current
For more information, see the attached PDF
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 1TKW000063ZL0
Tick is a wall or ceiling lamp with a slim metal body, ideal for indoor environments. Available in a wide range of finishes.
Reference: 07140
Seletti Gummy, table lamp with usb socket, made of resin. Suitable for all indoor environments.
Reference: F0375000*
Flos Archimoon Soft vintage, designed by Philippe Starck and produced in 1998, with fabric diffuser. Discontinued display item with signs of age-related wear, a rare collectible piece destined to increase in value over time. Lampshade and base are new. Equipped with all original functionalities.
Reference: 133269A324
&Tradition Mist, suspension lamps for indoor installation. Made of blown opal glass, they are available in different sizes. Light source not included.
Reference: AM01 B
Alessi, Anna G. design Corkscrew. Available in multiple colors.
Reference: A38201O
ACB Doris Applique, LED wall lamp, providing diffused light, for indoors. Steel structure, white opal glass sphere diffuser. Available in black or gold.