Reference: 3.MZ73.004.0

IGuzzini

DMX control panel with glass front that controls RGB and TW DMX luminaires in Plug & Play mode (check which models are compatible with this panel on the Product Book).

Reference: 3.MZ73.004.0

IGuzzini

DMX control panel with glass front that controls RGB and TW DMX luminaires in Plug & Play mode (check which models are compatible with this panel on the Product Book).

Reference: LP RGB111

Slide Design

Candy Light IR - Battery-operated RGBW LED module with remote control management. Screw-mount adapter is also available as an accessory to be purchased separately.

Reference: A40RGBOX435B

QLT

LED power supply 250mA 350mA 500mA for power LEDs up to 90W RGBW 4 channels and RGB-w channels with DMX, Dali and Push input.

Reference: A4744

Plust

Bluetooth indoor/outdoor battery-operated RGB LED kit. 

Reference: CTRL503

Lampo Lighting

Wireless wall controller with touch system, ideal for regulating and dimming 12/24V RGB and RGBW systems. For standard 503 box. 3V-(2x AAA batteries included). Radiofrequency Max. 30 meters.

Reference: KITRGBWAMPL

Lampo Lighting

Signal amplifier for LEDs and LED strips 12V (180W) 24V (360W), four channels. It allows to increase the maximum load (Watt) in RGBW or RGB circuits.

Reference: KITRGBWR4

Lampo Lighting

Radio frequency RGBW control unit kit complete with radio control. For brightness and color tone adjustment in RGB + Withe, color changes and white management, for 12-24 Volt DC modules or LED strips with RGBW input.

Reference: SK-EV4-X

Generico

12-24V RGB signal amplifier to increase the number of RGB coils in a circuit, Input voltage 12-24V, 12V (144W max) - 24V (288W max), Possibility of installing multiple repeaters in cascade, Dimensions: 25 x 105 x 65 mm.

Reference: A40INTRGB40B

QLT

Dimmable 4-channel RGBW and 3-channel RGB 12V or 24Volt (150/300W) control unit interface with DMX or DALI input, PUSH with self-test function and signaling LED. With DIP-SWITCH for control selection.

Reference: A40RCDIMCT0N

QLT

Wifi remote control for 12/24 Volt light temperature control systems, combinable with qlt pdl-u control unit

Reference: KIT-RGB/MINI-S/CON

Lampo Lighting

Mini Kit radio frequency RGB control unit complete with slim radio control with a maximum reception of 15 meters. To adjust the brightness and color tone in RGB, change color, for 12-24 Volt DC modules or LED strips with RGB input. With a maximum power of 80W at 12V and 160W at 24V.