- add remove
- add remove
- Strip led 220V
Strip LED COB 5M 14W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHTAvailable in different variantsKč2,055.11 Kč1,438.58- On sale!
- -30%
Lampo Strip LED 5050 60led/m 24V 14.4W/mt Reel 5M 72W Light color tone-3000°K WARM LIGHT, Version-IP20 For IndoorAvailable in different variantsKč1,170.06 Kč702.04- On sale!
- -40%
Alcapower Strip LED Snake Flex profile 11W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHT, Lunghezza-5 metersAvailable in different variantsKč3,528.19 Kč2,469.73- On sale!
- -30%
- add remove
- There are no more items in your cart
- Shipping
- Total Kč0.00
- add remove
- add remove
- Strip led 220V Strip LED COB 5M 14W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHTAvailable in different variantsKč2,055.11 Kč1,438.58
- On sale!
- -30%
Lampo Strip LED 5050 60led/m 24V 14.4W/mt Reel 5M 72W Light color tone-3000°K WARM LIGHT, Version-IP20 For IndoorAvailable in different variantsKč1,170.06 Kč702.04- On sale!
- -40%
Alcapower Strip LED Snake Flex profile 11W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHT, Lunghezza-5 metersAvailable in different variantsKč3,528.19 Kč2,469.73- On sale!
- -30%
- add remove
Reference: 181225
CBU-DCS is a dimmer powered by DALI bus for Casambi controllable via Bluetooth 4.0 for the operation of incandescent lamps, dimmable LEDs and dimmable LED power supplies. Compatible with DALI presence and light detectors.
Reference: 181224
CBU-TED is a Bluetooth controllable, Casambi enabled trailing-edge dimmer for operation of incandescent lamps, dimmable LED lamps and dimmable LED control gear.
Reference: LCM-40BLE
Multi-current constant current power supply from 350mA to 1050mA managed by CASAMBI application via bluetooth system.
Reference: SENSPIRSUP
Round infrared twilight PIR sensor with surface mounting IP20 for indoor use, 360 ° detection maximum 6 meters. Adjustable by time and sensitivity to light.
Reference: SENSPIRBI
IP54 wall-mounted infrared twilight PIR sensor for outdoor use, detection at 180 ° maximum 12 meters. Adjustable in time and in light sensitivity.
Reference: SENSPIRINC
Recessed infrared twilight PIR sensor IP65 for outdoor use with time and twilight adjustments.
Reference: SENSCRP15A
IP65 twilight switch for outdoor use with brightness intensity adjustment with adjustable sensitivity from 10 to 50 lux.
Reference: DLM1224-1CV-DALI
Dalcnet dimmer for low voltage LED modules from 12 to 48 volts DC. Adjustable with Dali signal, DMX, 1-10 V, push button
Reference: 127630
The CASAMBI Professional TCI is a direct current multipower power supply with DIP-SWITCH to select the required DC, complete with antenna.
Reference: KTRCTV01
Duralamp wireless set consisting of a receiver unit with antenna and two radio controls. The receiver is a 2-channel watertight control unit operating on the 433 MHz band suitable for use both indoors and outdoors.
Reference: 905
The 905 Router uses an Ethernet connection (10/100 Mb/s) to control a local DALI network. Basic functionality is available out of the box without any programming.
Reference: A40PDCV1000B
PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.
Remote control systems
Remote control systems for very low voltage 12/24 / 48V LED applications. These systems and control units allow the regulation of LED lighting systems thanks to remote commands. There are control units and control interfaces dmx, dali, 1/10V, with button, remote control, PWM, RGB or wireless Bluetooth signal amplifier repeaters. They are used in systems with LED strips installed, in single color or in red/green/blue and RGBW. These remote control products allow the regulation of light intensity, the rotary color changer, or more complex and articulated random combinations even in music rhythm.