

Converter for High Brightness LEDs
Be the first to ask a question about this product!
Reference: lvq
The LVQ converter is used to convert the constant voltage in input 12 / 24v in constant voltage and constant current in output (700mA).
Reference: A40LVX00000N
Constant voltage converter (12V or 24V) at 350mA constant current. For power LED modules. Dimensions: 40 x 18 x 12 mm. For 1 to 3/6 * led modules. * Input 11-15V max 3 Led - Input 22-24V max 6 Led
Reference: A40LVZ00000N
Constant voltage converter (12V or 24V) at 500mA constant current. For power LED modules. Dimensions: 40 x 18 x 12 mm. For 1 to 3/6 * led modules. * Input 11-15V max 3 Led - Input 22-24V max 6 Led
Reference: A40LVY00000N
12-24 volt constant voltage to 700mA constant current converter for LED modules
Reference: A40LVL00000N
Constant voltage converter (12V or 24V) at 500mA constant current. For power LED modules. Dimensions: 51 x 32 x 18 mm. For 1 to 3/6 * led modules. * Input 11-15V max 3 Led - Input 22-24V max 6 Led
Reference: 593513/11_10
Vibia Flat 5935, suspension lamp composed of a Ø40 cm diameter reflecting disc complete with dimmable LED source, suitable for indoor environments. Available in three finishes. Ceiling rose and source included.
Reference: ROS10CMBIA+4CLIP
White finish, 5 Cable outputs, Material Steel, Diameter 100 mm,
Reference: 120249
Gravity Round, walk-over or wall recessed LED spotlight for outdoor IP67. Light body and diffuser in resin. Drive over up to 5000 kg and resistant to thermal shocks from -60° to +90°. Available in Small and Large sizes. LED bulbs included. Adjustable CCT.
Reference: 08.0613.14A
1-10V, 48V dimmable control box. Necessary to transform passive (sink) 1-10V control systems into active (source). For remote installation. Used for 100-120V or 220-240V electrified track systems as Running Magnet, Tracking magnet and Infrastructure by flos.
Reference: 9076
Topo Base - Historical table lamp, with articulated arms, complete with LED source. Cap, arms and base in metal, handle in heat-insulating material. Available in five finishes. Design by Joe Colombo, 1970.
Reference: 7839596
Schuko type (European) 2-pole 10A converter adapter into a 3-pole American (USA) socket. Type F - Schuko male connector for NEMA 5-15