

Recessed luminaire that can be installed in walls, ceilings and floors (only with a spring). It is designed to use white monochrome LED lamps, powered with a continuous current of 350/500/700mA per luminaire. The D = 50 mm round frame has hidden screws, an AISI 304 stainless steel body and frame and an extra-clear, sodium - calcium tempered glass cover. The luminaire is fixed to the outer casing using special locking seals that hold it in place. The unit comes complete with LED circuit. The product's wiring system features an A2 stainless steel cable gland with a 1800 mm long H05RNF type 2x1 mm² output power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated joint located on the power cable. Two types of outer casing are available for installation and both can be ordered separately from the plastic optic assembly. The glass unit, optical assembly and outer casing together guarantee a maximum static load resistance of 2000 kg. The maximum surface temperature of the glass is less than 40°. Luminaire protected against polarity inversion. Powered in direct current at 350/500/700mA depending on the desired intensity, to be ordered separately.
Installation
The product is fixed to the outer casing using special locking seals with toolfree installation. The unit can be recessed in floors, ceilings or walls using the outer casing for installation. It can also be installed in counter walls and false ceilings using special spring accessories to be ordered separately.
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Reference: 3.X193.004
Casing made of plastic material for ground, floor, wall and ceiling with closing cap Material: thermoplastic Size (mm): 44x101, Weight (kg): 0.10
Be the first to ask a question about this product!
Reference: 3.B022.013.0
Luminaire recessed into the ground with die-cast aluminium body and outer casing; stainless-steel frame and screws; anodised polished superpure aluminium reflector. It is designed to use metal-halide lamps with adjustable spot optic. Recessed into the ground by means of an outer casing.
Reference: SD MDM200T
Slide Madame of Love IN decorative floor lamp in Baroque style, in the version for indoor environments. Made entirely of polyethylene, it is available in a range of 13 standard finishes. Light source not included.
Reference: SD KOK050A
Slide Design Kokò, penguin-shaped table lamp for indoor environments. Made of polyethylene, available in 7 luminous finishes.
Reference: 5468
Power supply with quick coupling with Type C socket, for LED lamps produced ONLY by Martinelli Luce as MiniPipistrello. Cable included with on/off switch.
Reference: A26CHFSET3
Minottiitalia Chiodo Fisso, screw-shaped wall hanger. Set of 3 pieces.
Reference: 636511/25
Vibia Plusminus Solo 6365 Flat Diffuser, table or wall lamp with adjustable diffuser, suitable for indoor environments. Available in different finishes and versions.