- add remove
- add remove
- Strip led 220V
Strip LED COB 5M 14W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHTAvailable in different variants£70.85 £49.59- On sale!
- -30%
Lampo Strip LED 5050 60led/m 24V 14.4W/mt Reel 5M 72W Light color tone-3000°K WARM LIGHT, Version-IP20 For IndoorAvailable in different variants£40.34 £24.20- On sale!
- -40%
Alcapower Strip LED Snake Flex profile 11W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHT, Lunghezza-5 metersAvailable in different variants£121.63 £85.14- On sale!
- -30%
- add remove
- add remove
- add remove
- Strip led 220V Strip LED COB 5M 14W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHTAvailable in different variants£70.85 £49.59
- On sale!
- -30%
Lampo Strip LED 5050 60led/m 24V 14.4W/mt Reel 5M 72W Light color tone-3000°K WARM LIGHT, Version-IP20 For IndoorAvailable in different variants£40.34 £24.20- On sale!
- -40%
Alcapower Strip LED Snake Flex profile 11W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHT, Lunghezza-5 metersAvailable in different variants£121.63 £85.14- On sale!
- -30%
- add remove
Reference: 5468
Power supply with quick coupling with Type C socket, for LED lamps produced ONLY by Martinelli Luce as MiniPipistrello. Cable included with on/off switch.
Reference: 141131
Electronic power supply 6W in direct current 500mA. IP20 independent power supply, for indoor use.
Reference: 122598
Electronic power supply 8W in direct current 350mA. IP20 independent power supply, for indoor use.
Reference: 122604
Electronic power supply 6W in direct current 150mA, 50V MAX. IP20 independent power supply, for indoor use. Nominal voltage 220-240V.
Reference: 127711
Costant current electronic driver 500mA 12W max. Rated input voltage 100-240V.
Reference: DRVAL451A0
Power supply DR-VAL-45/220-240/1A0 for led, small miniaturized driver in constant current from 1050mA constant current from 45W 60Volt Max. Dimensions: 116x41x25mm
Reference: DRPCPFM18350
Power supply DR PC-PFM-18/220-240/350 for led, small miniaturized driver, phase cut dimmable (PHASE-CUT) in constant current from 350mA constant current from 18W 32-54Volt Max. Dimensions: 130x43x30mm
Reference: 99129
iLed per Linea Light Simon power supply unit for 3-6 constant current modules for LEDs of 630mA 12W MAX. Nominal output voltage DC (under load) 9-20V. Maximum DC output voltage (a vacuum) 30V.
Reference: 127814
Dimmable electronic power supply in direct current, for a maximum of 100W (4.15A) at 24V. IP52 independent power supply, also for outdoor use in humid environments. Possibility to adjust the light intensity through the 0 / 1-10V system. Nominal voltage 120-277V. Dimensions: 241.3x43x25.4 mm (9.5''x 1.69 '' x 1 ''). -UL- approved
Reference: 127813
Dimmerable electronic power supply in direct current, for a maximum of 60W (2,5A) at 24V. IP52 independent power supply, also for outdoor use in humid environments. Possibility to adjust the light intensity through the 0 / 1-10V system. Nominal voltage 120-277V. Dimensions: 148.2x45.6x25.4 mm (5.83''x 1.79 '' x 1 ''). -UL- approved
Reference: 123170
Electronic power supply adjustable from 1.05A to 2.1A in constant current and 48V direct current max 55W.
Reference: LCM-40BLE
Multi-current constant current power supply from 350mA to 1050mA managed by CASAMBI application via bluetooth system.
Constant current power supplies
Diffusione luce offers for sale a complete range of constant current electronic power supplies for LED applications. To choose the right constant current power supply it is necessary to carry out this calculation: current absorbed by the LED spotlight x working voltage of the spotlight. Example: 0.350 A x 3.4 volts = 1.2 W (power absorbed by the spotlight). In this case, you must choose a power supply with an output power starting from 1.2W and a current of 0.350 A. Do not install power supplies with a minimum output power higher than the nominal power absorbed by the installed spotlight, for example: 1.2W and 350mA spotlight with power supply starting from 4w and 350mA -> wrong and broken LED diode. Different matter when LED spotlights are installed in series, in this case to calculate the power of the power supply it is necessary to add the power of the spotlights, example: 10 products of 1.2w and 350 mA = 12w 350mA -> necessary power supply with nominal power minimum 12w 350mA. Meanwell electronic ballasts with IP65/IP67 protection ratings are also available for outdoor applications.