Reference: LD0402G3

Ai Lati Lights

Solar LED garden bollard, in dark gray color, for outdoor use. Die-cast aluminum structure, polycarbonate diffuser. Equipped with solar panel that charges the battery, twilight and movement sensor.Note: The stake for installation on soft ground is included.

Reference: 1112A-396-30173

Novantadieci 9010

Oolite Smooth, outdoor bollard with integrated led. Available in six finishes made Italy.

Reference: 2073/J

Martinelli Luce

Trilly, conical pendant lamp in plastic material for outdoor use for bulb with E27 LED or E14 LED screw connection (included) depending on the version.

Reference: FN195007L-3_10

Foscarini

Aplomb, suspension lamp for indoor use. Made of concrete, aluminum and polycarbonate. Available in several variants

Reference: LEDAD1200/IP20/BC

Lampo Lighting

Flexible 19.2W / m LED strip with continuous light effect, 3528 SMD led at 24V DC. Luminous Flux 2100 ~ 2300 Lm / Meter. 5 meter roll available in three different colors, 3000K warm light, 4500K neutral light and 6400K cold light, and two different degrees of protection IP20 for indoor and IP64 for outdoor use.

Reference: 927023

Alcapower

20 meters dimmable COB LED strip, flexible and foldable. Power 14W/m (70W total) with a total of 432 LED/m at 220-230V AC. Suitable for outdoor use IP65. Available with 3000K or 6500K light temperature.

Reference: 126421

TCI

TCI JOLLY dimmable LED driver 32W, constant current 250-900mA, constant voltage 12/24V, 100-240V input, PUSH, 1-10V, DALI and DMX control.

Reference: 7662-10-W30

Ivela

Right or left power connector, for recessed three-phase track. Available in two different colors.

Reference: 6123-07-30

Ivela

Track projector, black color, made of die-cast aluminum. To apply the Spot to the Low Voltage ELV Light Kit, you must order the adapter separately with the Jack Code 6601-00 Attachment. Available with 7 or 10 cm tip.

Reference: 3072/200/RS

FAI

Round fabric cable complete with transparent on / off switch and socket, red cable, 200 cm long in total.

Reference: RF85863

Flos spare parts

Original Flos replacement accessory, for Romeo Moon S1 and S2 lamps. Does not include suspension wire.

Reference: DS2040CRC

Artemide

Artemide accessory Elastic Fabric 165 with Inox Hoops, for Falkland Floor & suspension lamp. In White or special red color

Reference: 3.X329.015.0

IGuzzini

Recessed installation casing in plastic material, for Walky Medium Round e Walky Medium Square lighting fixtures.

Reference: WAP2058

Artemide Spare Parts

Spare part frame 2nd joint, for Tizio lamps by Artemide. Carefully choose the Tizio model for which you want the replacement, from the drop-down menu.

Reference: PR/SP/CLIP

Lampo Lighting

Metal fixing clips for folding profile to aluminum surface, 2 m long.

Reference: F3136059

Flos spare parts

Replacement glass diffuser, for IC model 1 lamps. Original spare parts.

Reference: WLD4002X2

Shot Bot Lighting

LED Bot Lighting Shot Globe bulb model WLD4002X2 with 2.5W power and E27 base. Glass Globe bulb diameter 125 mm. 

Reference: 700202.00A

Daylight Italia

LED T35 bulb with tubular shape, E27 connection that develops a luminous flux of 850 lumens in warm 3000k light. Also for outdoor use

Reference: PO1115093024G2

Osram

Osram Parathom PRO AR111 is a dimmable LED bulb, 7.4W, G53 cap, 12V low voltage, with CRI97 and 40,000-hour lifespan.

Reference: SH-G9-3W-110V

Generico

Led bulb with dimmable G9 socket, 110V USA current with 48 LED. 

Reference: A40DMXDALI10

QLT

QLT A40DMXDALI10 DMX512 or DALI to PWM converter for RGB systems, with automatic input recognition, IP20 rated.

Reference: SD BLT032V

Slide Design

Slide Design Blos Low Table, low coffee table for indoor and outdoor environments. Made entirely of polyethylene, it is available in a range of 13 standard finishes.

Reference: LP AMB060A

Slide Design

Slide Design AMBROGIO Light White, light decorative servant table, made of EcoAllene and Polyethylene. ONLY for indoors.

Reference: 97101STK27

Lumina

FLO Lounge, dimmable LED floor lamp for indoor use, with adjustable head and body. Cold extruded head, body and base in aluminum. Available in 7 different finishes and two versions of light temperature.