

Features
. Driver for built-in use.
. Input and output terminal blocks on the same side.
. Single terminal at the primary and secondary circuit (wire cross-section up to 2,5 mm2 / AWG13).
. Ultra compact size.
. It can be used for lighting equipment in protection class I and II.
. Driver can be secured with slot for screws.
. Protections:
- against overheating and short circuits; - against mains voltage spikes;
- against overloads.
. Current regulation -8 % +5 % including temperature variations.
For more information, see the attached pdf
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: A40RGBOX412B
12V LED power supply for LEDs with power up to 75W (4 x 1.56A) RGBW 4-channel and RGB 3-channel with DMX and Dali input, dimming and switching off with one or more buttons.
Reference: 032825
Waterproof big recessed lamp floodlight, for outdoor use or in the ground, possibility to mount LED or halogen bulbs 100/240V MAX 60W.
Reference: F3010TA150TR10
TOUR - Decorative table with wheels, historic from 1993, made of transparent glass with four pivoting wheels and solid rubber tires.