TCI LED Driver MP15 HPFU 15W 60-360mA Multipower

Multi-power power supply equipped with dip-switch for selecting the output current. Independent IP20 power supply, for internal use. Protected in class II against electric shocks for direct and indirect contacts.

Equipped with terminal cover and cable clamp. Opposite input and output terminals (cable section up to 2.5 mm2 / AWG13). Single terminal block on primary and secondary.

Cable clamp on primary and secondary for cables with diameter: min. 3 mm - max. 8 mm. Power supply fixed with screw slots. Nominal voltage 110-127V or 220-240V. Dimensions 115x34x19 mm

Protections:

• Thermal and short circuit;
• Against mains overvoltages; - against overloads.
• Regulated current ±5 % including thermal variations

Selection of output current via dip-switc Variants:

• 2.5W (2.5W) 60 mA cost.
• 3.3W (3.3W) 80 mA const.
• 4.1W (4.1W) 100 mA const.
• 5.0W (5.0W) 120 mA const.
• 5.8W (5.8W) 140 mA const.
• 6.6W (6.6W) 160 mA const.
• 7.4W (7.4W) 180 mA const.
• 8.3W (8.3W) 200 mA const.
• 9.1W (9.1W) 220 mA const.
• 10W (10W) 240 mA const.
• 10.8W (10W) 260 mA const.
• 11.6W (10W) 280 mA const.
• 12.4W (10W) 300 mA const.
• 13.2W (10W) 320 mA const.
• 14.1W (10W) 340 mA cost.
• 15W (10W) 360 mA cost.

*Power at 100-127V is in brackets

For more information, see the attached PDF