

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor



Multipower driver supplied with dip-switch for the selection of the output current.
Driver for built-in use.
It can be used for lighting equipment in protection class I.
Active Power Factor Corrector.
Analogical input for thermal sensor connection.
Auxiliary output 12 V max. 100 mA.
Current regulation ±5 % including temperature variations.
Dimensions 110x76x30 mm. Indoor use.
IP20 independent power supply, for indoor use.
. Protections:
- against overheating and short circuits; - against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a
Dip-switc selection of the constant output current Variants:
45W (40) 2...43V 1,05 A cost
50W (40) 2...42V 1,2 A cost.
50W (40) 2...36V 1,4 A cost.
50W (40) 2...31V 1,6 A cost.
50W (40) 2...28V 1,75 A cost.
50W (40) 2...23V 2,1 A cost.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 43402
Single adjustable recessed ceiling spotlight, made of aluminum. 1xGU10 / MR16 light source options. Bulb NOT included.
Reference: 700310.00A
Linear LED COB glass lamp with a power of 4W that develops a luminous flux of 450 lumens in warm light 2700K, with 360° light emission. 78 mm long with a diameter of 13.5 mm. Linear r7s socket. Dimensions similar to the halogen bulb.
Reference: L0885/L NE
Oluce Colombo 885/L LED ceiling lamp, adjustable and height-adjustable. Vintage Retro design. Painted aluminium reflector and steel ceiling fitting. Available in three colours. Designer: Joe Colombo (1970)
Reference: F5960066
Outdoor luminaire in polished copper finish. Steplight for wall installation with LED light source. Available in three different installation versions. Design by Piero Lissoni.
Reference: LCM-40DA2
Mean Well LCM-40DA2 LED driver, 42W, constant current 350-1050mA, DALI 2 dimmable, IP20.