

Multipower driver supplied with dip-switch for the selection of the output current.
Driver for built-in use.
It can be used for lighting equipment in protection class I.
Active Power Factor Corrector.
Analogical input for thermal sensor connection.
Auxiliary output 12 V max. 100 mA.
Current regulation ±5 % including temperature variations.
Dimensions 110x76x30 mm. Indoor use.
IP20 independent power supply, for indoor use.
. Protections:
- against overheating and short circuits; - against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a
Dip-switc selection of the constant output current Variants:
45W (40) 2...43V 1,05 A cost
50W (40) 2...42V 1,2 A cost.
50W (40) 2...36V 1,4 A cost.
50W (40) 2...31V 1,6 A cost.
50W (40) 2...28V 1,75 A cost.
50W (40) 2...23V 2,1 A cost.
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: EST758
Pan Nip Cob recessed spotlight round with 5w power for outdoor use in aisi 316 stainless steel available in two color variants 3000k warm white and 4000k neutral light waterproof.