

Multipower driver supplied with dip-switch for the selection of the output current.
Driver for built-in use.
It can be used for lighting equipment in protection class I.
Active Power Factor Corrector.
Analogical input for thermal sensor connection.
Auxiliary output 12 V max. 100 mA.
Current regulation ±5 % including temperature variations.
Dimensions 110x76x30 mm. Indoor use.
IP20 independent power supply, for indoor use.
. Protections:
- against overheating and short circuits; - against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a
Dip-switc selection of the constant output current Variants:
45W (40) 2...43V 1,05 A cost
50W (40) 2...42V 1,2 A cost.
50W (40) 2...36V 1,4 A cost.
50W (40) 2...31V 1,6 A cost.
50W (40) 2...28V 1,75 A cost.
50W (40) 2...23V 2,1 A cost.
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: DLX1224-4CV-DMX
BUS + SEQUENCER + FADER + DIMMER + DRIVER ,DMX control interface operated 12-24V with 4 channels of 5A (max 10A total). dimensions: 88 x 54 x 26 mm
Reference: SD GEA040T
Slide Design Gear, decorative table-stool made of polyethylene. For indoor and outdoor environments. Available in 13 finishes.
Reference: REELCOB15WIP20DL
New adhesive dual-color COB LED strip with flexible circuit, 15W/meter continuous light effect for a total of 800 lumens per meter. Each coil measures 5 meters, 24 V DC led. Coil with high brightness, dimmable, thanks to the controller it is possible to choose the desired shade of light in kelvin gradation, between 2700K warm light up to 4000K neutral...