

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor



Multipower driver supplied with dip-switch for the selection of the output current.
. IP20 independent driver, for indoor use .
. Class II protection against electric shock for direct or indirect contact.
. It can be used for lighting equipment in protection class I and II .
. Active Power Factor Corrector.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm.
Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.
Nominal voltage: 220-240V
Dimensions 110x52x22 mm
Dip-switch selection of the output constant current Variants:
12W 15...48V max 250 mA cost.
14W 15...48V max 300 mA cost.
17W 10...48V max 350 mA cost.
19W 5...48V max 400 mA cost.
20W 5...44V max 450 mA cost.
20W 5...40V max 500 mA cost.
20W 5...36V max 550 mA cost.
20W 5...33V max 600 mA cost.
20W 5...31V max 650 mA cost.
20W 5...29V max 700 mA cost.
20W 5...27V max 750 mA cost.
20W 5...25V max 800 mA cost.
20W 5...23V max 850 mA cost.
20W 5...22V max 900 mA cost.
20W 24V cost. 900 mA max
11W 12V cost. 830 mA max
Reference: 162110
Recessed rotary dimmer available for different recessed series suitable for regulating dimmable LED bulbs of the best brands on the market.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 3.TRR3.710.0
iGuzzini Drop by Drop, LED suspension lamp with diffused light. Body and end caps made of polycarbonate, internal structure in aluminum and sheet steel. Available in two color versions with different optics.
Reference: G01174
Gufram Andy's Cactus, created by Andy Warhol, new versions of Limited Edition 1/99 coat hangers, made of polyurethane foam. Available in three finishes.
Reference: 9076
Topo Base - Historical table lamp, with articulated arms, complete with LED source. Cap, arms and base in metal, handle in heat-insulating material. Available in five finishes. Design by Joe Colombo, 1970.
Reference: FN150003_10
Foscarini Havana, outdoor led floor lamp made of polyethylene and metal.
Reference: 1IPW1LED63ZL0
IPE W1 - LED wall lamp with indirect downward and upward light emission, for indoor environments. Body entirely in painted aluminum. Available in two versions of light temperature. The customizable colors of the Kerakoll Warm and Metallic collections are only on request.
Reference: 71470
Fine 71 is a RGB-WW LED strip with 5-channel dynamic white, perfect for indoor and outdoor environments. RGB color management and all shades of white from 2700 to 6500K. The indicated price is calculated per 1 meter strip. Coils up to a maximum of 5 metres.