

Multi-power supply with dip-switch for selecting output current. Independent IP20 power supply for indoor use. Protected in class II against electric shocks for direct and indirect contacts. Analog input (NTC) for thermal sensor connection. Regulated current + -5% including temperature variations. Input and output terminals on the same side (cable section up to 11.5 mm2). Strain relief on primary and secondary for cables with min. 3 max 8 mm. Thermal protections and short circuits, against network extra-voltages, against overloads.
Nominal voltage 110-127V - Nominal voltage 220-240V
dimensions 110x52x23 mm
Features
Dip-switc selection of the output current Variants:
12W (12) 43V max. 250 mA cost.
17W (15) 43V max. 350 mA cost.
20W (15) 43V max. 400 mA cost.
20W (15) 43V max. 450 mA cost.
20W (15) 40V max. 500 mA cost.
20W (15) 36V max. 550 mA cost.
20W (15) 33V max. 600 mA cost.
20W (15) 28V max. 700 mA cost.
16W (15) 24 cost. 700 mA cost. (Constant voltage output)
* Power at 100-127V in brackets
Be the first to ask a question about this product!
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: 127413
Electronic power supply adjustable in constant current from 350mA to 1.05A.
Reference: 20951295
&Tradition Copenhagen SC7, suspension lamp in the medium version, for indoor environments. Blown opal glass shade and brass bracket. Light source not included.
Reference: 9137001925
Philips electronic ballast for 2x55W PLL tubes. Dimensions: 280x30x28mm
Reference: 41275
Homega Tile, rectangular or square outdoor wall lamp with tunable white integrated LED. Available in 4 powers 5-8-15-20W and relative dimensions.
Reference: KIG-010-DH
Constant current LED driver, 10W multi-current at 450mA max, dimmable Triac ELV, 0-10V, 1-10V, potentiometer, 10V PWM. Available at 200-240V and 100-277V. Dimensions: 135x30x20mm.
Reference: 700127.00A
Frosted LED Bulb E14 candle 4W warm light 2700K luminous flux 440lm
Reference: B9268G050T1B
Ceiling cylindrical gypsum lamp in white color, in the lower model of the series. Possibility to mount LED bulb inside the product.