TCI driver LED 220-240V UNIVERSALE 20 20W

 IP20 independent power supply, for indoor use. Possibility to adjust the direct current between 250mA - 350mA - 400mA- 450mA - 500mA -550mA - 600mA - 700mA - 24V. Rated voltage 220-240V, maximum output power 20W. Dimensions 110x52x23 mm

• Multipower driver supplied with dip-switch for the selection of the output current.
• IP20 independent driver, for indoor use .
• Class II protection against electric shock for direct or indirect contact.
• Driver for built-in use.
• It can be used for lighting equipment in protection class I and II.
• Active Power Factor Corrector.
• Current regulation ±5 % including temperature variations.
• Supplied with terminal cover and cable retainer.
• Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2 / AWG15).
• Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm .
• Driver can be secured with slot for screws.
• Protections:
• - against overheating and short circuits;
• - against mains voltage spikes;
• - against overloads.
• Thermal protection = C.5.a.
• Double output impedance for use in household electrical appliances.

Selection of constant output current via dip-switch Variants:

13W  54V max. 250 mA cost. 

19W  54V max. 350 mA cost. 

20W  50V max. 400 mA cost. 

20W  44V max. 450 mA cost.

20W  40V max. 500 mA cost.

20W  37V max. 550 mA cost.

20W  34V max. 600 mA cost.

20W  29V max. 700 mA cost.

16W  24 cost.   700 mA max.