

Brightness adjustment 1- 100% via 1...10 V interface (I < 0 ,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz). Dimensions: 256x78x47mm
Features
Dimmable electronic driver with output voltage for LED modules.
Independent driver with case IP66.
Class I protection against electric shock for direct or indirect contact.
Supplied with connecting leads on primary and secondary circuits for connection.
If the input cable is damaged it can only be replaced by authorized personnel.
Protections against mains voltage spikes.
Operation Mode
Switching off only on primary side (L-N).
Light regulation 1- 100 % by means of 1...10 V interface (I < 0,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz).
Specific dimming cable for 0/1...10 Vdc electronic potentiometer (0/1...10 V local dimming, double insulation required for external connection).
LED load must be distributed on both output terminal block.
For more information, see the attached PDF
Be the first to ask a question about this product!
Reference: 127908
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 12.5A at 12v.
Reference: 127909
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 6.25A at 24v.
Reference: 127933
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 3.12A at 48v.
Reference: 127910
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 200W at 16.6A at 12v.
Reference: 127915
TCI VPS MD adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 80w to 3.33A at 24v adjustable with IGBT and TRIAC "phase cut" dimmer. Dimensions: 200x70x46mm
Reference: 127908
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 12.5A at 12v.
Reference: 97501STK27
FLO Wall, wall lamp with integrated plug, LED dimmable for indoor use, with adjustable head. Cold extruded head, body and base in aluminum. Available in 7 different finishes and two versions of light temperature.
Reference: 127342
Very small and compact TCI driver to embed RD57 1-10V PUSH 9W 350 mA dimmable with 1-10v and PUSH system. Dimensions: Ø57mm x 22mm
Reference: F6307004
Wall mounted applique fixture providing diffused lighting; a switch located near the diffuser allows for 4-level light adjustment.
Reference: NPF-120-24
Diver for LED 120W 24V constant voltage power supply, for outdoor use IP67.
Reference: L0450 OR
Lyndon is a project by Vico Magistretti born in 1977 and developed over the years into a vast collection that includes multiple variations and sizes: for indoors and outdoors, suspended, floor or wall mounted.