

Brightness adjustment 1- 100% via 1...10 V interface (I < 0 ,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz). Dimensions: 256x78x47mm
Features
Dimmable electronic driver with output voltage for LED modules.
Independent driver with case IP66.
Class I protection against electric shock for direct or indirect contact.
Supplied with connecting leads on primary and secondary circuits for connection.
If the input cable is damaged it can only be replaced by authorized personnel.
Protections against mains voltage spikes.
Operation Mode
Switching off only on primary side (L-N).
Light regulation 1- 100 % by means of 1...10 V interface (I < 0,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz).
Specific dimming cable for 0/1...10 Vdc electronic potentiometer (0/1...10 V local dimming, double insulation required for external connection).
LED load must be distributed on both output terminal block.
For more information, see the attached PDF
Be the first to ask a question about this product!
Reference: 127908
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 12.5A at 12v.
Reference: 127909
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 6.25A at 24v.
Reference: 127933
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 3.12A at 48v.
Reference: 127911
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 200W at 8.5A at 24v.
Reference: 127915
TCI VPS MD adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 80w to 3.33A at 24v adjustable with IGBT and TRIAC "phase cut" dimmer. Dimensions: 200x70x46mm
Reference: 05.7006.CU
Easy Kap D. 05 Fixed (fixed) - Optic Medium, recessed ceiling LED spotlight. Aluminum body with liquid paint finish. Available in 5 finishes.No installation frame required
Reference: 700324.00L
Daylight Filament Dash D170, flat LED bulb with E27 socket, with 6W power, dimmable. Available in Clear and Frost versions.
Reference: 3.X584.004.0
Plastic outer casing for floor installation with closing caps and joint for continuous line Lun-Up Evo projector