

Brightness adjustment 1- 100% via 1...10 V interface (I < 0 ,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz). Dimensions: 256x78x47mm
Features
Dimmable electronic driver with output voltage for LED modules.
Independent driver with case IP66.
Class I protection against electric shock for direct or indirect contact.
Supplied with connecting leads on primary and secondary circuits for connection.
If the input cable is damaged it can only be replaced by authorized personnel.
Protections against mains voltage spikes.
Operation Mode
Switching off only on primary side (L-N).
Light regulation 1- 100 % by means of 1...10 V interface (I < 0,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz).
Specific dimming cable for 0/1...10 Vdc electronic potentiometer (0/1...10 V local dimming, double insulation required for external connection).
LED load must be distributed on both output terminal block.
For more information, see the attached PDF
Be the first to ask a question about this product!
Reference: 127908
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 12.5A at 12v.
Reference: 127909
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 6.25A at 24v.
Reference: 127933
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 3.12A at 48v.
Reference: 127911
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 200W at 8.5A at 24v.
Reference: 127915
TCI VPS MD adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 80w to 3.33A at 24v adjustable with IGBT and TRIAC "phase cut" dimmer. Dimensions: 200x70x46mm
Reference: RF22934
Replacement electronic ballast ideal for Flos string light products.
Reference: G60E27RGBWN
Professional RGBW bulb changes colors and 4000K white light, with infrared remote control. Diameter of 60mm and a total height of 115mm, with E27 socket with 9W in 230V with a luminous flux of 608 lumens.
Reference: F017A2BA006
Flos Ingraze Fixed 400, linear ground recessed luminaire complete with led source, for outdoor environments. Fixed optic, available in frame and frameless versions. Formwork NOT included.
Reference: LMS16.21.BI
Raiden, integrated led ceiling lamp for interiors. Body entirely in painted metal with acrylic diffuser. Available in two sizes Small or Medium. Click switch to adjust the color temperature to built-in 3000K or 4000K.
Reference: 0041.21.SA WN
Vivida Bow, 120 cm LED ceiling lamp in minimal style with integrated LED, for indoor use. Painted aluminum structure with polycarbonate diffuser with temperature regulation from 3000k warm light to 4000k neutral light.
Reference: 3.MK54.774.0
Rectangular 10-optical element recessed spotlight with 21W LED sources, fixed optics and flood aperture. Available in three color variants.