

Brightness adjustment 1- 100% via 1...10 V interface (I < 0 ,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz). Dimensions: 256x78x47mm
Features
Dimmable electronic driver with output voltage for LED modules.
Independent driver with case IP66.
Class I protection against electric shock for direct or indirect contact.
Supplied with connecting leads on primary and secondary circuits for connection.
If the input cable is damaged it can only be replaced by authorized personnel.
Protections against mains voltage spikes.
Operation Mode
Switching off only on primary side (L-N).
Light regulation 1- 100 % by means of 1...10 V interface (I < 0,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz).
Specific dimming cable for 0/1...10 Vdc electronic potentiometer (0/1...10 V local dimming, double insulation required for external connection).
LED load must be distributed on both output terminal block.
For more information, see the attached PDF
Be the first to ask a question about this product!
Reference: 127908
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 12.5A at 12v.
Reference: 127909
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 6.25A at 24v.
Reference: 127933
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 3.12A at 48v.
Reference: 127911
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 200W at 8.5A at 24v.
Reference: 127915
TCI VPS MD adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 80w to 3.33A at 24v adjustable with IGBT and TRIAC "phase cut" dimmer. Dimensions: 200x70x46mm
Reference: 0442/3
Fai a plaster lamp with a geometric composition formed by cylinders. Indoor ceiling lamp with GU10 fittings included. Available with 3 cylinders and 5 cylinders.
Reference: PC1265_CGC516_CGSU66_CGO2988_CCS2673
Dome, portable LED lamp in small version. Available in four models and more combinations only on request.
Reference: FN221001L_80
Foscarini Birdie, led table lamp, made of polycarbonate and metal. Available in multiple variations.
Reference: C2502(MIB)
Pi suspension lamp made of ceramic. Ideal for indoor installation. Available in multiple variants.
Reference: L0345/L BR
Pascal historical floor lamp with indirect and reflected light available in satin bronze color, double independent switching, base in Serena stone. Light source 2 x max 100 W (E27) + 1 x max 300 W (R7s). Possibility to mount LED bulbs. Designed by Vico Magistretti in 1983.
Reference: 20069
Shan by Faro Barcelona, table lamp with steel frame and parchment lampshade.