

Brightness adjustment 1- 100% via 1...10 V interface (I < 0 ,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz). Dimensions: 256x78x47mm
Features
Dimmable electronic driver with output voltage for LED modules.
Independent driver with case IP66.
Class I protection against electric shock for direct or indirect contact.
Supplied with connecting leads on primary and secondary circuits for connection.
If the input cable is damaged it can only be replaced by authorized personnel.
Protections against mains voltage spikes.
Operation Mode
Switching off only on primary side (L-N).
Light regulation 1- 100 % by means of 1...10 V interface (I < 0,35 mA), 600 Kohm potentiometer or 10 V PWM signal (100Hz...3KHz).
Specific dimming cable for 0/1...10 Vdc electronic potentiometer (0/1...10 V local dimming, double insulation required for external connection).
LED load must be distributed on both output terminal block.
For more information, see the attached PDF
Be the first to ask a question about this product!
Reference: 127908
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 12.5A at 12v.
Reference: 127933
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 150W at 3.12A at 48v.
Reference: 127911
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 200W at 8.5A at 24v.
Reference: 127910
TCI VPS adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 200W at 16.6A at 12v.
Reference: 127915
TCI VPS MD adjustable direct current electronic ballast with voltage output for independent LED modules for indoor and outdoor use IP66 from 80w to 3.33A at 24v adjustable with IGBT and TRIAC "phase cut" dimmer. Dimensions: 200x70x46mm
Reference: PT.BIBLIO/ORO
Ondaluce Biblio floor lamp for indoor use, made of painted metal with base in matching or gre marble. Available in two finishes.
Reference: L0306 OR
Switch lamp 306 model floor version with direct and indirect light available in two colors black and gold. Reflector and metal structure. Turn on / off by turning the lampshade.
Reference: HANSS00PRS01RG9000EU
Hanami Suspension Small, dimmable LED suspension lamp, for indoors. Made of Lentiflex, polycarbonate and steel. Electric wire available in two versions.
Reference: 01.1002.02.65
Flos Basic Downlight Recessed Spotlight Counterceiling GU10 GU5.3 Grey
Reference: PR/DFSPG
Lampo External Angular 90 ° Polycarbonate Screen Corner Screen Accessory For Aluminum Profile Kit
Reference: 11554
Wall Mounting Spacer accessory for Moonlight applique lamp.