ZIGBEE Professional wireless adjustable DC electronic power supply with DIP-SWITCH from 16-38W - 350mA-1,05A. Dimming 0/1 - 100 % via PUSH SWITCH function and ZIGBEE standard devices for integrated ZIGBEE WIRELESS module. Dimensions: 146.5x44x30mm
Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless ZIGBEE module.
IP20 independent driver, for indoor use.
Class II protection against electric shock for direct or indirect contact.
Active Power Factor Corrector.
Current regulation ±5 % including temperature variations.
Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 9 mm.
Driver can be secured with slot for screws.
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
Thermal protection = C.5.a
Light regulation 0/1 - 100 % by means of PUSH SWITCH function and standard ZIGBEE devices for ZIGBEE integrated WIRELESS module.
Designed to work with ZIGBEE systems.
Full AM DIMMING: 1-100%.
Light regulation 0/1 - 100 % by means of PUSH SWITCH function (mains voltage):
- a short push to turn on and off;
- a longer push to increase or decrease light intensity;
- regulation automatically stops at minimum and maximum values;
- for another on, regulation or off command, release the push button and give the desired command again;
- dimming level memory at mains restore.
Maximum length of the cable, from push button to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 240 V mains cable.
ATTENTION: only use normally open push buttons with no incorporated warning light.
-16W - 10...54V - 300 mA cost.
-18,5W - 10...54V - 350 mA cost.
-21,5W - 10...54V - 400 mA cost.
-24W - 10...54V - 450 mA cost.
-27W - 10...54V - 500 mA cost.
-29,5W - 10...54V - 550 mA cost.
-32W - 10...54V - 600 mA cost.
-35W - 10...54V - 650 mA cost.
-36W - 10...51V - 700 mA cost.
-38W - 10...50V - 750 mA cost.
-38W - 10...47V - 800 mA cost.
-38W - 10...44V - 850 mA cost.
-38W - 10...42V - 900 mA cost.
-38W - 10...40V - 950 mA cost.
-38W - 10...38V - 1 A cost.
-38W - 10...36V - 1,05 A cost.
For more information, see the attached PDF
TCI wireless products belonging to this family have as a plus the ZigBee standard protocol that makes them compatible with a very wide range of ZigBee devices already available on the market. The capacity of this system is highly extended as it is based on a mesh network, while all the easyto-fi nd accessories guarantee its extreme fl exibility in terms of building an ad-hoc solution. Our ZigBee products are ideal also for all those applications requiring both on-site and remotecontrol to achieve important cost savings, thanks to the scheduling via gateway and the monitoring of consumptionswith a wattmeter. All the information can be collected and stored in the Cloud.