TCI CASAMBI Multipower Direct Current Dimmable Power Supply

TCI CASAMBI driver Wireless Direct Current dimmable

Select Version

With Terminal Cover
Without Terminal Cover

$215.96 Save 25%

$287.95

24 / 48 hours

More buy more save

For 5 products spend per unit

For 10 products spend per unit

The CASAMBI Professional TCI is a direct current multipower power supply with DIP-SWITCH to select the required DC, complete with antenna.

Read more ... arrow_drop_down

Availables 6 Items

local_shipping

Shipped in 1-2 days
More information about shipping

Quantity

delivery_truck_speed Fast shipping for products marked "Shipped in 1-2 days".

back_to_tab Free returns within 30 days from the delivery date.

credit_card Pay in interest-free installments with Scalapay or PayPal. No extra fees, instant approval.

Description
Product Details

Description

Complete with antenna with a wireless control unit with 0/1 - 100% brightness adjustment via PUSH SWITCH function and APP or compatible devices for CASAMBI WIRELESS module integrated.

Features

. Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless CASAMBI receiver.
. IP20 independent driver, for indoor use (PROFESSIONALE CASAMBI).
. Class II protection against electric shock for direct or indirect contact (PROFESSIONALE CASAMBI).
. Driver for built-in use (PROFESSIONALE CASAMBI BI).
. It can be used for lighting equipment in protection class I and II (PROFESSIONALE CASAMBI BI).
. Active Power Factor Corrector.
. Current regulation ±5 % including temperature variations.

. Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 9 mm (PROFESSIONALE CASAMBI).
. Driver can be secured with slot for screws. Protections:
- against overheating and short circuits; - against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.
. Do not apply within 0,2 m from human body.

Operation Mode

. Light regulation 0/1 - 100 % by means of PUSH SWITCH function and APP or compatible devices for CASAMBI integrated WIRELESS module.
. Full AM DIMMING: 1-100% (minimum current: 7 mA).
. Light regulation 0/1 - 100 % by means of PUSH SWITCH function (mains voltage):
- a short push to turn on and off;
- a longer push to increase or decrease light intensity;
- regulation automatically stops at minimum and maximum values;
- for another on, regulation or off command, release the push button and give the desired command again;
- dimming level memory at mains restore.
. Maximum length of the cable, from push button to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 240 V mains cable.
. ATTENTION: only use normally open push buttons with no incorporated warning light.

Selection of constant output current by dip-switch

Variants:

16W 10...54V max 300 mA cost.

18,5W 10...54V max 350 mA cost.

21,5W 10...54V max 400 mA cost.

24W 10...54V max 450 mA cost.

27W 10...54V max 500 mA cost.

29,5W 10...54V max 550 mA cost.

32W 10...54V max 600 mA cost.

35W 10...54V max 650 mA cost.

36W 10...51V max 700 mA cost.

38W 10...50V max 750 mA cost.