

Reference: LPV-150-24
Led driver costant voltage, 150W 24V, Waterproof IP67, Short-circuit protection.
Reference: LRS-150-24
Switching power supply LRS 150 24 with output voltage: 24V DC, adjustable between 21.6 and 28.8V DC. Output current: 6.5A. Maximum output power: 156W.
Reference: LRS-100-12
Switching power supply output connection: 12V DC, adjustable between 10.2 - 13.8V DC. Output current: 8.5A. Maximum output power: 100W.
Reference: LRS-100-24
Power supply with output voltage: 24V DC, adjustable 21.8 - 28.8 Vdc. Output current: 4.5A. Maximum output power: 100W. Protection: overload, overheat, voltage rise, short circuit.
Be the first to ask a question about this product!
Reference: A40PWMREP00B
Amplifier PWMR or signal repeater for control unit with RGB, dimmer or color temperature signal. With a maximum output power of 288W at 12V and 576W at 24V.
Reference: A40PDLU0000B
Interface 2.4Ghz Wireless universal RF control unit for the control and management of 4 channels of the RGB and RGBW system, can be combined with rgbox35 .
Reference: A40PDL43RGBB
Interface for 433 Mhz radio control for adjusting brightness and color tones for LED modules or strips at 12-24 Volt DC in RGB. With a maximum power output of 120W at 12V and 240W at 24V.
Reference: A40KITRGB
Interface kit and 433 Mhz radio control for adjusting brightness and color tones in RGB, for modules or strips LEDs at 12-24 Volt DC in RGB. Complete with receiver radio control included in the kit. With a maximum power output of 120W at 12V and 240W at 24V. Complete code A40RC433RGBN + A40PDL43RGBB
Reference: A40PDL43CT0B
Interface for 433 Mhz radio control for adjusting brightness and color temperature between warm white and cold white. For 12-24 Volt DC LED modules or strips. With a maximum power output of 120W at 12V and 240W at 24V.
Reference: 08.9103.00
No Trim pre-installation frame, for installation without a concealed frame in plasterboard for KAP 80 and KAP 80 Plus recessed square spotlights.
Reference: RF3120304
Complete red replacement diffuser, for Romeo Babe Soft Wall lamp and Archimoon Soft by Flos. 100% original spare part.
Reference: FN274001_10
Foscarini Gem, led table lamp, made of glass and metal. Suitable for any indoor environment.
Reference: ETOCS00PRS00000LEDEU
Etoile takes its name and inspiration from the world of dance. In perfect balance on impalpable and graceful shapes totally made of Lentiflex, the applique ceiling light has an innovative magnetic attachment that allows you to easily detach and remove the LED circuit created ad hoc for maintenance or replacement operations.
Reference: F3055031
Replacement diffuser for Glo-Ball with diameter Ø450 mm, by Flos. See description for compatibility.
Reference: SENSPIRINC
Recessed infrared twilight PIR sensor IP65 for outdoor use with time and twilight adjustments.