

Nominal voltage 220 - 240 V Mains frequency 50 - 60 Hz Direct voltage (dc) 154…276 V Operating frequency 42…130 kHz Max. number of ECGs with autom. 10 to 12 Max No. of ECG p. automatic circuit 16 A 19 Trigger time 0.6 s Length 123 mm Width 79 mm Height 33 mm Distance between fixing holes-length 129.5 mm Distance between fixing holes-width 67 mm Cross-section of cables, input side 0.5-1.5 mm² Ambient temperature –10…+ 50 °C Optional wire clamp, see chapter Mounting ECG - wire clamp Interface for dimming DALI / Touch DIM / Touch DIM Sensor Dimming range 3…100% Dimmable Overtemperature protection Suitable for luminaires with front glass I Safety lock a end of life EOL T.2 VDE approval marks / E1 approval / VDE-EMC Acc. to EN 61347-2-3/acc. to EN 60929/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000 - 3-2/sec. EN 61547
Be the first to ask a question about this product!
Reference: PTI35SM
Osram 35W S Mini, For HID Lamps 35W, Energy efficiency index EEI: A2, Power supply voltage: 220 ... 240 V, Line Frequency: 50 ... 60 Hz, RI suppression: to EN 55015 / CISPR 15.
Reference: PTFIT70I
Powertronic PTi 70 / 220-240 I download halide lamp electronic ballast 70w
Reference: QTISE2X36
Osram ballast 220-240Volt Quicktronick QTIS Instant Start electronic for two 2xL36W bulbs. Dimensions: 359x31x28mm. For fluorescent lamps.
Reference: QTI2X354980GII
QTI 2x35-49-80 quicktronic GII intelligent electronic ballast, phase cut dimmable.
Reference: QTI2X2854N
Osram electronic ballast QTi 2x28/54/35/49 g2 for fluorescent tubes 28-35-49-54 W , dimmable with cut-off system. Dimensions: 360x30x21mm
Reference: 127701
TCI STMP IP54 electronic ballast in constant current/voltage 700mA 6/8W 2...12V of very small dimensions with IP54 casing, suitable for installation in damp places or with water sprays. Dimensions: 52.5x46x26.5mm
Reference: L0720 OS
Oluce Berlin, LED ceiling or wall lamp. Metal structure, sandblasted wired glass diffuser. Available in three size versions.
Reference: 6244.AC
Jacobox, 150 mm square adjustable spotlight for interiors with total disappearance, made of AirCoral for installation in plasterboard ceilings. Available in the single version, for LED bulbs with 1x Gu10 socket at 100-240V. Formwork for brick to be purchased separately.
Reference: 0563050A
Wall fixing support compatible only with Tolomeo MEGA models. Available in two versions.
Reference: 0070/NE
Porcelain lampholder with curve base and switch on/off, available in different color.
Reference: C00275CHNWF
iLed for Linea Light Nitum Q, square recessed spotlight made of brass. Available in four finishes and three colour temperatures. Power supply not included, can be purchased separately (see accessories).