Helvar 942 interface for 0-10V devices
  • Helvar 942 interface for 0-10V devices
  • Helvar 942 interface for 0-10V devices
  • Helvar 942 interface for 0-10V devices
  • Helvar 942 interface for 0-10V devices
  • Helvar 942 interface for 0-10V devices

Helvar 942 interface for 0-10V devices

zł1,886.37

The Imagine 942 input unit is a product capable of interfacing switches, sensors, timers or other 0-10VDC control devices with an Imagine light control system.

Read more ... arrow_drop_down
local_shipping
Not availableinfo

Quantity

Description

It has 8 inputs to which it is possible to connect normally open buttons or switches to send DALI commands to the system. Inputs 1 - 4 can be configured as 0 - 10 VDC analog inputs allowing, for example, to connect light sensors. Through these inputs it is possible to recall scenes or interact with the Scheduler function of the Imagine system (conditions).

Main features

Status LED providing information on the operating mode

current: normal operation, initialization, selection or closing

contact.

Select button.

Can be used with normally open buttons or switches.

Can be used with analogue inputs from 0 - 10 VDC.

Programmable via IMAGINE Workshop software.

Can be used with timers.

Installation notes

The SC terminal of this module must be connected to ground to ensure correct operation.

The maximum length of the wires connecting the input unit inputs to the buttons (or switches) is 50 meters.

The analog inputs must be powered by an external source (0 - 10 VDC).

If the device is used in environments subject to a lot of electrical interference, the DALI cable must be shielded and grounded.

Technical data

  • Input unit inputs
  • Connections: Inputs 1-8; COM (common)
  • Voltage on terminals 1-8: 5V nominal (no load), less than 2V with contact closed.
  • Overload protection: ±35V
  • Short circuit current: 0.5 mA max
  • Minimum contact closing time: 50 mS

Analog inputs

  • Analog Connections: Inputs 1-4; COM (common)
  • Input: 0-10VDC
  • Overvoltage protection: ±15V
  • Input impedance: 7.5 kilohms
  • Settling Time: 10 ms
  • Response Time: 50 ms

Diet

  • Power: Powered by the DALI bus
  • Absorption: 10 mA
  • Operating conditions
  • Ambient temperature: 0ºC…40ºC
  • Relative humidity: 90% max, non-condensing
  • Storage temp: -10º C…+70º C

Mechanical data

  • Casing: Occupies 4 DIN modules (70 mm)
  • Weight: 110g
  • Compliance and standards
  • EMC
  • Emissions: EN 50 081
  • Immunity: EN 61 547

Safety

  • Safety: EN 60 950
  • Box IP rating: 30
  • Terminal IP classification: 00
  • Isolation: 4 kV from DALI network to inputs

For more information, see the attached PDF

Helvar
Guaranteed Original Product

Data sheet

Reference
942
Input voltage
100-240 V
Depth in mm
58
Width in mm
90
Length in mm
70
Degree of protection
IP20
Material
Pvc
Adjustable power
with 1/10 volt system
Compatible voltage
EU-AUD-USA-UK-JAP
Download
picture_as_pdf Scheda tecnica
Warranty verified 2-year warranty from date of purchase
Assistance

Do you have a question?

Our team usually replies within 2 business hours.

Hours
Mon-Fri 9:00-13:00
14:30-18:30
Typical reply within 2 hours
Read the FAQ

Fill out the form below. We will reply to you by email as soon as possible.

Question about the product

* Required fields
Send us a question about this product now!
Viewed products
-15% Reduced price On sale! Penta Glifo led wall lamp

Reference: 1908-31-11L8-DXNE

Penta

Penta Glifo led wall lamp

Glifo, projecting wall light with integrated dimmable LED, for indoor use. Diffuser, vertical wall element and movable horizontal arm in black steel. Detail at the end of the arm in ebony finish. Available in the two lengths Medium or Large, both touch dimmable with cable or without cable.

Available in multiple variants
Price zł5,024.32 Regular price zł5,910.97
visibility
More
Why buy to us
Trustpilot verified reviews