Dimmer Strip LED RF Reel 4 zone 2.4GHz 12V-24V max 10A with Remote

2.4GHz 4-zone RF reel dimmer Kit for strip LED 12V or 24V MAX 10A with 4-zone remote control 2.4G technology included (requires 2x AAA battery not included). The maximum allowed load at 12V is 120W, while at 24V it is 240W. Output current per channel 6A. Receiver dimensions 85 x 45 x 22 mm.

The kit (remote control and controller) needs to be synchronized, to make it proceed in this way: correctly connect the power supply and the load (led strip) to the controller; remove the controller power supply; reset the power supply and press the ZONE ON key of the area to which you want to associate within 3 seconds, for 3 times. The LEDs will blink 3 times and will switch off after synchronization.

The led strip will always light up at the brightness set in the last stored dimmer.