

2.4GHz 4-zone RF reel dimmer Kit for strip LED 12V or 24V MAX 10A with 4-zone remote control 2.4G technology included (requires 2x AAA battery not included). The maximum allowed load at 12V is 120W, while at 24V it is 240W. Output current per channel 6A. Receiver dimensions 85 x 45 x 22 mm.
The kit (remote control and controller) needs to be synchronized, to make it proceed in this way: correctly connect the power supply and the load (led strip) to the controller; remove the controller power supply; reset the power supply and press the ZONE ON key of the area to which you want to associate within 3 seconds, for 3 times. The LEDs will blink 3 times and will switch off after synchronization.
The led strip will always light up at the brightness set in the last stored dimmer.
Be the first to ask a question about this product!
Reference: 200304V1
Rotary dimmer for Zigbee 3.0 flush-mounting boxes controllable via application in the phone. Input and output voltage 100 - 240 V AC . Voice control can be managed by Amazon Alexa, Google Assistant.
Reference: 90/1070
Satco Foot Dimmer 120V 60Hz 4.3A 500W LED Incandescent Halogen USA Plug
Reference: SDTD4815
Control dimmer for leds, which can be controlled via a TRIAC dimmer switch (AC dimming) or PUSH button. Works in a wide range of voltages 12V-24V-48V DC (needs an external DC power supply).
Reference: DALI-230V-1KW
DIN RAIL dimmer with phase cut output and DALI push input. Dimensions: 150 x 90 x 60mm
Reference: DALI-230V-500W
Phase cut output dimmer with DALI input. Dimensions: 150 x 90 x 58mm
Reference: LP AMA060
Slide Design AMANDA Light White, light decorative servant table, made of EcoAllene and Polyethylene. ONLY for indoors.
Reference: 15540 3530
Pin-up Coppery Bronze, adjustable metal wall or ceiling lamp by Studio Italia Design. Designed by Andrea Tosetto in 2015. Available with warm light 3000K or 2700K.
Reference: 279800
Diesis - Floor lamp with a minimal look in powder coated metal. Available in three colors and with adjustable and inclinable diffuser.
Reference: 7558-00-30
For three-phase track adapter Ivela 7601. It allows the electrical and mechanical connection of binary headlights and headlights not expressly designed for the track installation.
Reference: 09.8231.DR
Oblique Floor USB-C - Dimmable LED floor lamp with direct asymmetrical light emission. Made of extruded aluminum and methacrylate, it is available in six different finishes. USB-C connection integrated in the base.
Reference: 322/90
78mm long linear R7s lampholder for halogen or LED bulbs. Complete with connection cables.