Artemide Funivia Sharping led module for cable system

Artemide Funivia Sharping is a LED module for cable system designed by Carlotta de Bevilacqua for Artemide Architectural. Crafted in metal, this luminous element integrates into the Funivia system through a bridge connector that mechanically clamps onto the cable, drawing energy directly from it without the need for additional wiring. The integrated LED source delivers a colour temperature of 3000 K with a colour rendering index of CRI 90, producing warm, colour-faithful light. The IP20 protection rating designates its use in indoor environments, while insulation class III and an input voltage of 220–240 V ensure full electrical safety.

Sharping is available in two versions that differ in size and output: Sharping 8, featuring a 19 W LED, a luminous flux of 1488 lm and dimensions of Ø 315.5×69×27 mm, and Sharping 12, with a 25 W LED, a luminous flux of 2232 lm and dimensions of Ø 463.5×69×27 mm. Both versions deliver a standard beam angle of 62°, with a 24° option available on request. Dimming is managed via Push or the Artemide APP, allowing each source to be controlled individually or as a group to suit different lighting scenarios. Both versions are available in Black or White finishes. This module lends itself to architecturally striking compositions, perfectly suited to offices, showrooms, commercial venues and contemporary residences, where the Funivia system can extend horizontally, vertically or at an angle to adapt to any spatial geometry. Please note that a Starter Pack is required for the source to operate. Colour temperatures of 2700 K or 4000 K are available on request: please specify your preference in the order notes.