TCI SMART 50 27-50W DC Direct Current Electronic Drivers

Features
. Multipower driver supplied with dip-switch for the selection of
the output current.
. IP20 independent driver, for indoor use (SMART 50).
. Class I protection against electric shock for direct or indirect
contact (SMART 50).
. Driver for built-in use (SMART 50 BI).
. Active Power Factor Corrector.
. It can be used for lighting equipment in protection class I.
. Analogical input (NTC) for thermal sensor connection.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on the same side
(wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables
with diameter: min. 2 mm - max. 9 mm (SMART 50).
. Driver can be secured with slot for screws.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.