

Features
. Multipower driver supplied with dip-switch for the selection of
the output current.
. IP20 independent driver, for indoor use (SMART 50).
. Class I protection against electric shock for direct or indirect
contact (SMART 50).
. Driver for built-in use (SMART 50 BI).
. Active Power Factor Corrector.
. It can be used for lighting equipment in protection class I.
. Analogical input (NTC) for thermal sensor connection.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on the same side
(wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables
with diameter: min. 2 mm - max. 9 mm (SMART 50).
. Driver can be secured with slot for screws.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.
Be the first to ask a question about this product!
Reference: 127016
Multipower electronic LED driver PUSH dimmable DC
Reference: 141092
Electronic power supply 12W in direct current 250mA (10W) or 350mA. IP20 independent power supply, for indoor use. Nominal voltage 220-240V. Dimensions: 70x41x19 mm.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: 122262
TCI DC JOLLY MD LC multipower driver 7,2-24W 150-500 mA dimmable with igbt/triac system, mains dimming trailing edge/leading edge. Dimensions: 166X46X34mm
Reference: L0238 NE
Oluce ATOLLO 238 table lamp with direct and reflected light emission, for indoor environments, in the smallest version of the collection. Made of metal, Black colour. Light sources NOT included.
Reference: 3.M847.712.0
Temperature 4200k light , Power consumption 6.7W , 531 lumen efficiency, 24V DC low voltage input.
Reference: L1159/R NE
Oluce Coupè series arc wall lamp, swiveling and adjustable, for interiors, with direct and reflected light. Structure in chromed metal and aluminum. Available in two colors. Designer: Joe Colombo (1967)
Reference: 1125C-396-27183
Pria Adige, outdoor floor lamp. Integrated LED. Available in three finishes and three color temperatures.
Reference: 09387B4
Kartell Planet, floor lamp complete with dimmable LED source, for indoor environments. Steel structure, technopolymer diffuser. Available in two finishes and two different height versions.
Reference: F9467057
Flos adjustable chrome 8W LED wall lamp that emits a luminous flux of 553 lumens in 3000K warm light and a 70 ° light beam.