

Features
. Multipower driver supplied with dip-switch for the selection of
the output current.
. IP20 independent driver, for indoor use (SMART 50).
. Class I protection against electric shock for direct or indirect
contact (SMART 50).
. Driver for built-in use (SMART 50 BI).
. Active Power Factor Corrector.
. It can be used for lighting equipment in protection class I.
. Analogical input (NTC) for thermal sensor connection.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on the same side
(wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables
with diameter: min. 2 mm - max. 9 mm (SMART 50).
. Driver can be secured with slot for screws.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.
Be the first to ask a question about this product!
Reference: 127016
Multipower electronic LED driver PUSH dimmable DC
Reference: 141092
Electronic power supply 12W in direct current 250mA (10W) or 350mA. IP20 independent power supply, for indoor use. Nominal voltage 220-240V. Dimensions: 70x41x19 mm.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: 122262
TCI DC JOLLY MD LC multipower driver 7,2-24W 150-500 mA dimmable with igbt/triac system, mains dimming trailing edge/leading edge. Dimensions: 166X46X34mm
Reference: 1359016
Avlon 1200, mirror with integrated led strip for interiors. Ideal for wet areas such as bathroom areas. AVAILABLE UNTIL STOCKS LAST. ASK FOR INFORMATION BEFORE PURCHASING.
Reference: 06.1033.00
Flos Connection cable 500mm for LED Curtain with Tyco fast connection
Reference: F004Z010001
Flos floor pole with base for installing the Landlord Soft lamp.
Reference: FN1690073L_71
Foscarini Allegro Assai, LED suspension lamp, made of painted aluminum and metal. Available in several variants.
Reference: A40CPL11200B
QTI CPL Waterproof independent electronic ballast for LEDs with constant voltage and current power at 350mA 14W, suitable for installations in small spaces thanks to its very compact dimensions of 124x56x19mm.
Reference: 3.M847.712.0
Temperature 4200k light , Power consumption 6.7W , 531 lumen efficiency, 24V DC low voltage input.