TCI Professional 42W Direct Current Electronic Driver

Features
. Multipower driver supplied with dip-switch for the selection of the output current.
. IP20 independent driver, for indoor use (PROFESSIONALE 42).
. Class II protection against electric shock for direct or indirect contact (PROFESSIONALE 42).
. Driver for built-in use (PROFESSIONALE 42 BI).
. It can be used for lighting equipment in protection class I and II (PROFESSIONALE 42 BI).
. Active Power Factor Corrector.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 11 mm (PROFESSIONALE 42).
. Driver can be secured with slot for screws.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.

Congruent flos code: 60.9162

Selection of constant output current via dip-switch Variants:

13W 300 mA
15W 350 mA
18W 400 mA
20W 450 mA
22W 500 mA
24W 550 mA
27W 600 mA
29W 650 mA
31W 700 mA
32W 750 mA
33W 800 mA
35W 850 mA
38W 900 mA
40W 950 mA
42W 1000 mA
42W 1050 mA