TCI Power Supply LED 38W Professionale 1-10V WR

TCI power supply for LED modules, multi-power, equipped with a dip switch for selecting the output current from 300 to 1050 mA.

Dimmable with a 0-10 volt system.

Power from 3 to 38w.

UL Certified.

Input voltage: 100-240 volts.

Independent IP20 power supply, for indoor use.

Class I protection against direct and indirect contact with electric shock.

Can be used with lighting fixtures in protection class I (PROFESSIONAL BI).

Active PFC.

Regulated current ±5%, including temperature variations.

Opposite input and output terminals (cable cross-section up to 1.5 mm2 / AWG15).

Cable clamp on primary and secondary windings for cable diameters: min. 2 mm - max. 11 mm.

Power supply secured with screw slots.

Protections:

- thermal and short circuit;

- against mains overvoltages;

- against overloads.

- Thermal protection = C.5.a.

 Light regulation 0/3 - 100 % by means of 0/1...10 V local interface (I=1 mA) or 100 Kohm potentiometer.

 Full AM DIMMING: 3-100%

 Specific dimming terminal connection with a 0/1...10 Vdc electronic  potentiometer (0/1…10 V local dimming, double insulation required for external connection).

Current selection:

Current voltage maximum power

300 mA 10…45 V 13 W (13*)

350 mA 10…45 V 15 W (15*)

400 mA 10…45 V 18 W (18*)

450 mA 10…45 V 20 W (20*)

500 mA 10…45 V 22 W (22*)

550 mA 10…45 V 24 W (24*)

600 mA 10…45 V 27 W (27*)

650 mA 10…45 V 29 W (29*)

700 mA 10…45 V 31 W (30*)

750 mA 10…44 V 32 W (30*)

800 mA 10…42 V 33 W (30*)

850 mA 10…42 V 35 W (30*)

900 mA 10…42 V 38 W (30*)

950 mA 10…40 V 38 W (30*)

1000 mA 10…38 V 38 W (30*)

1050 mA 10…36 V 38 W (30*)

*100-120V