

Power supply DC 12W 500mA BMU power supply to be incorporated. Constant output current 500 mA and voltage between 2 and 24 Volt dc. Voltage without load 24 Vdc, always connect the LEDs cold and not hot (power supply connected to the mains voltage) . Suitable for professional lighting equipment for stage lights, studios or the like. Input and output terminals on the same side. Can be used for luminaires in protection class I and II. Single terminal on primary and secondary (cable section up to 1.5 mm2 / AWG15). Fixing the power supply with slots for screws. Very small and compact size. Protections: - thermal and short circuit - against mains extra-voltages - against overloads. Regulated current -6% +5% including temperature variations. Size 66 x 22 x 50 mm.
Reference: EYELED/CR/BC
Recessed LED step marker spotlight with eyelid with a power of 1W with a 45 ° aperture beam. Luminous flux of 120-130 lumens depending on the light color chosen. 350mA constant current.
Reference: TC01M/CR/BC
Mini round LED spot small size, 1W for recessed. With a narrow opening beam at 120° degrees. It works with a 350mA power supply and 12 or 24V. Available in three different shades of light 3000K, 4000k, 6400k and three different colors white, chrome and silver gray.
Reference: TC04M/CR/BN
Mini round LED spot small size, 1W for recessed. With a narrow opening beam at 30° degrees. It works with a 350mA power supply and 12 or 24V. Available in three different shades of light 3000K, 4000k, 6400k and three different colors white, chrome and silver gray.
Reference: 0406/BI/CA/OR
Mini recessed button spotlight in shiny gold color with an average 60 ° beam from 1W to 350mA in aluminum alloy light 3000/4000/6000 k at your choice.
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: 776/1 RC . BKM
Cattaneo Accessory For Easy System Cable Holder
Reference: EYELED/CR/BC
Recessed LED step marker spotlight with eyelid with a power of 1W with a 45 ° aperture beam. Luminous flux of 120-130 lumens depending on the light color chosen. 350mA constant current.
Reference: 407/06
LED pole head to be incorporated for outdoor use. Complete with 40W high brightness LEDs. Prepared to be adapted inside a post with a diameter of 20cm. Made of thermoplastic with PMMA opal sphere. Simple installation.
Reference: 183040EI
Electronic superimposed igniter, with built-in timer. Rated voltage 220-240V and power 70-400W. Available in two variants.
Reference: 127102
TCI PUMA MD adjustable constant current electronic ballast with DIP-SWITCH from 11-20w/250-900mA adjustable with IGBT "phase cut" dimmer. Dimensions: 140x38x26.5mm
Reference: 141114IP
Electronic driver in SLIM format in direct current 700mA maximum 11W. Rated input voltage 100-240V. Dimensions: 161x22x22mm