
 
 - On sale!
- -20%
 
  
  
  
  
 
 
  
  
  
  
 


IP20 independent driver, for indoor use.
. Class II protection against electric shock for direct or indirect contact.
. Supplied with terminal cover and cable retainer.
. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13).
. Single terminal block on primary and secondary circuits.
. Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 6 mm.
. Current regulation -7 % +5 % including temperature variations.
. Protections:
- against overheating;
- against short circuits;
- against mains voltage spikes;
- against overloads.
Nominal voltage: 220-240V.Dimensions: 68x35x21,5 mm.
Be the first to ask a question about this product!
Reference: 127016
Multipower electronic LED driver PUSH dimmable DC
Reference: 141092
Electronic power supply 12W in direct current 250mA (10W) or 350mA. IP20 independent power supply, for indoor use. Nominal voltage 220-240V. Dimensions: 70x41x19 mm.
Reference: 127556
Electronic power supply adjustable with dip-switch from 250mA to 900mA in constant current and 12V-24V direct current. Dimmable with IGBT-TRIAC system.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: 122262
TCI DC JOLLY MD LC multipower driver 7,2-24W 150-500 mA dimmable with igbt/triac system, mains dimming trailing edge/leading edge. Dimensions: 166X46X34mm
Reference: 06.2500.40
ZERO TRACK electro-mechanical 24V surface profile for ceiling or wall installation, for indoor use. Made of painted aluminum in 5 different finishes. Connectors must be ordered separately together with all accessories. See the diagram in the images for installation examples.
