

IP20 independent driver, for indoor use.
. Class II protection against electric shock for direct or indirect contact.
. Supplied with terminal cover and cable retainer.
. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13).
. Single terminal block on primary and secondary circuits.
. Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 6 mm.
. Current regulation -7 % +5 % including temperature variations.
. Protections:
- against overheating;
- against short circuits;
- against mains voltage spikes;
- against overloads.
Rated voltage 110-240V. Dimensions: 68x35x21.5 mm.
FLOS article code: 150
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: MOD555WL-L4G3K
Amulet wall lamp, ideal for indoor use, made of transparent glass. Available in two sizes.
Reference: AK00400
Artemide Mouette led 135W suspension lamp with diffused double emission, with a luminous flux of 12215 lm. White color. Length 2550mm.
Reference: 60-721
Branch with 2.5 meters length for indoor-outdoor, with 150 LED Flash, 24V. Gray aluminum frame. Available in cold light or warm light. Supplied with base and hooks for vertical or horizontal positioning.
Reference: KIG-040-DH
Constant current LED driver, 40W multi-current at 1400mA max, dimmable Triac ELV, 0-10V, 1-10V, potentiometer, 10V PWM. Available at 200-240V and 100-277V. Dimensions: 171.5x54x20mm.
Reference: 1442/BI
Cabriolette, indoor LED wall light. Available in two colors.
Reference: F3772033
Luminator historic floor lamp, tubular in shape with indirect light emission, for indoor environments.